Third Party Firmware: Difference between revisions

From ITCwiki
Jump to navigation Jump to search
No edit summary
Line 20: Line 20:




You may want to upgrade your want to update the firewall of your wireless router if you want to integrate one or more of the following feature. The factory default firmware may not have these feature enable.
You may want to upgrade your want to update the firewall of your wireless router if you want to integrate one or more of the following feature into your router. The factory default firmware may not have these feature enable.


*Client mode or Client bridge mode
*Client mode or Client bridge mode
Line 37: Line 37:


*Filtering by web site and keyword
*Filtering by web site and keyword


==Downloading and Installation==
==Downloading and Installation==

Revision as of 01:40, 8 May 2010

Introduction

In this article, you will be introduced to some of the third-party firewalls. Upgrading the firewall of your wireless router is one way to upgrade your wireless router because it will give you some rich feature. Below are some of the third party firewall features.

  • Stability under heavy load
  • Strengthens the signal
  • Setup a wireless client bridge and repeater bridge
  • Realtime bandwidth monitors
  • QoS
  • Create VLAN
  • Enable VPN Services
  • Enhanced Security: WPA and WPA2, both versions for Enterprise, better customizable firewall, OpenVPN is enable, and so on.


You may want to upgrade your want to update the firewall of your wireless router if you want to integrate one or more of the following feature into your router. The factory default firmware may not have these feature enable.

  • Client mode or Client bridge mode
  • Repeater mode or Repeater bridge mode
  • WDM mode(Wireless Distribution System)
  • bandwidth monitoring
  • Virtual WLANs
  • Advanced QoS
  • IP and MAC filtering (including time and date)
  • Filtering by web site and keyword

Downloading and Installation

In this section, I will guide you to download, install and configure some of the most popular third-party firewalls. There are many third-party firewalls available today. Here is a list of the third-party firewall available for Wi-Fi routers. http://en.wikipedia.org/wiki/List_of_wireless_router_firmware_projects. The three most popular are DD-WRT, Tomato, and OpenWRT. DD-WRT and Tomato are the most two popular because they are easy to install and configure.

DD-WRT web interface:

Ddwrt.jpg


Tomato web interface:

Tomato.jpg

DD-WRT Installation

DD-WRT is an alternate firmware available for many wireless routers. It is one of the most popular firewall. There is a paid and free versions available. DD-WRT is suitable for a great variety of WLAN routers and embedded systems.

TOMATO Installation

Tomato is a free open source Linux-based firmware. The major emphasis of Tomato is on stability, speed and efficiency. Tomato includes several types of bandwidth usage charts, advanced QoS access restriction features, raised connection limits which enables P2P networking, and support for 125 High Speed Mode (marketed by Linksys as "SpeedBooster").


Conclusion