IPv6 Routing Protocol Configurations
Setting up IPv6 protocols.
All commands include an example address/es and router name/s.
IPv6 ROUTING TYPES
• Static
• RIPng
• IS-IS for IPv6
• OSPFv3
• MP-BGP
• EIGRP for IPv6
Static Routing
| Command | Description |
|---|---|
| Austin(config)#ipv6 route
2001:db8:c18:3:/64 2001:db8:c18:2:/64 |
Creates a static route configured to send all packets
to a next-hop address of 2011:db8:c18:2::2 |
| Austin(config)#ipv6 route
2001:db8:c18:3:/64 fastethernet 0/0 |
Creates a directly attached static route configured to
send packets out interface fastethernet 0/0 |
| Austin(config)#ipv6 route
2001:db8:c18:3:/64 fastethernet 0/0 2001:db8:c18:2:::2 |
Creates a fully specified static route on a broadcast
interface |
RIPng
| Command | Description |
|---|---|
| Router(config)#interface
serial 0/0 |
Moves to interface configuration mode. |
| Router(config-if)#ipv6 rip tower
enable |
Creates the RIPng process named tower and enables
RIPng on the interface |
| Router(config)#ipv6 router rip
tower |
Creates the RIPng process named tower if it has
not already been created, and moves to router configuration mode |
| Router(config-router)#maximum-
paths 2 |
Defines the maximum number of equal-cost routes
that RIPng can support |
IS-IS
| Command | Description |
|---|---|
| router isis area-tag
Example: Router(config)# router isis area2 |
Enables IS-IS for the specified IS-IS routing process, and
enters router configuration mode. |
| net network-entity-title
Example: Router(config-router)# net 49.0001.0000.0000.000c.00 |
Configures an IS-IS network entity title (NET) for the
routing process. |
| ipv6 router isis area-name
Example: Router(config-if)# ipv6 router isis area2 |
Enables the specified IPv6 IS-IS routing process on an
interface. configuration mode |