Franske ITC-2515 Assignments

From ITCwiki
Revision as of 20:30, 28 August 2017 by BenFranske (talk | contribs) (→‎Labs)
Jump to navigation Jump to search

CCNA 1 Assignments

Labs

You are responsible for completing ALL of these labs. You must submit a lab report for each chapter (you may combine multiple labs from the chapter into a single report). If you work with a partner on a lab you only need to submit a single lab report for the two of you but it must have both your names on it. Each lab report is worth up to 20 points. This falls into the Labs/Homework category of your course grade.

  1. Lab 2.1.4.7: Establishing a Console Session with Tera Term
    • NOTE: You do not need to complete the part 3 of this lab "Access a Cisco Router Using a Mini-USB Console Cable" as the 1841 routers do not have Mini-USB configuration ports.
  2. Lab 2.3.3.3: Building a Simple Network
  3. Lab 2.3.3.4: Configuring a Switch Management Address
    • NOTE: In this lab you are asked to install a telnet client in Windows. Because you do not have full administrative privileges on the campus computers you will not be able to do that. Instead you can use the Telnet connection type built into Tera Term or PuTTY to connect to your switch's management address. Ask your instructor if you need help with this.
  4. Lab 3.4.1.2: Using Wireshark to View Network Traffic
    • NOTE: In this lab Wireshark may appear to use a different interface than is shown in the lab, if you encounter this issue you should close Wireshark and start "Wireshark Legacy" instead
    • NOTE: In this lab you are asked to capture some ICMP PING packets with Wireshark. It may be that when you use the PING command you see the system pinging an IPv6 address instead of an IPv4 address and the packets not showing up in Wireshark. If you encounter this use the -4 option like "ping -4 google.com" to force the system to use IPv4.
  5. Lab 4.1.2.4: Identifying Network Devices and Cabling
    • NOTE: In this lab you will be working to identify some different types of equipment and cabling. Instead of asking your instructor for samples please select at least three different Cisco devices from the racks in the room as well as three different cables from the hooks on the wall and identify them.
  6. Lab 4.2.4.5: Viewing Wired and Wireless NIC Information
  7. Lab 5.1.1.7: Using Wireshark to Examine Ethernet Frames
  8. Lab 5.1.2.8: Viewing Network Device MAC Addresses
  9. Lab 5.2.1.7: Viewing the Switch MAC Address Tables
  10. Lab 6.3.2.7: Exploring Router Physical Characteristics
    • NOTE: You will notice that your routers may be 1800 series routers instead of 1900 series routers and that the serial interface cards in our routers also look different. This will mean that you will need to modify some of your labs a little bit as you progress through the courses. If you suspect something in a lab might be different because of the router model you should ask your classmates or your instructor if you need assistance.
  11. Lab 6.5.1.2: Building a Switch and Router Network
    • NOTE: These labs were developed with Cisco 1900 series routers which have Gigabit Ethernet LAN interfaces. If you are working on one of our 1800 series routers you will need to adjust the lab to use Fa0/0 and Fa0/1 as the Fast Ethernet interfaces instead of G0/0 and G0/1 which do not exist on the 1800 series.
  12. Lab 7.2.5.4: Configuring IPv6 Addresses on Network Devices
    • NOTE: If your switch has never been used for IPv6 before you may not be able to set an IPv6 address on it until you change the SDM template to allow for dual-stack configuration. See this page for instructions on how to do that.
  13. Lab 7.3.2.7: Testing Network Connectivity with Ping and Traceroute
    • NOTE: Inver Hills uses a different type of serial interface cards than these labs were designed with so the cabling and configuration of serial interfaces is going to be a bit different than in the lab. If you are unsure of how to do this please ask your instructor or classmates for help.
  14. Lab 9.2.1.6: Using Wireshark to Observe the TCP 3-Way Handshake
  15. Lab 9.2.3.5: Using Wireshark to Examine a UDP DNS Capture
  16. Lab 9.2.4.3: Using Wireshark to Examine FTP and TFTP Captures
  17. Lab 10.2.2.8: Observing DNS Servers
    • NOTE: If you have problems loading the www.icann.net website by IP address try using www.exploreminnesota.com and it's IP address instead, note you may not get successful pings from www.exploreminnesota.com though.
    • NOTE: If you think you may be seeing an IPv6 address instead of an IPv4 address you can force ping to use IPv4 by using the "ping -4 www.icann.net" command
  18. Lab 10.2.3.4: Exploring FTP
    • NOTE: Instead of the WSFTP program you can use the free FileZilla FTP client from https://filezilla-project.org/
    • NOTE: If you have problems connecting to or listing files on the FTP server it is possible you are being blocked by the campus network firewall. Please change to the ITC network (the yellow jack in B109) and try connecting again. Don't forget to switch back to the campus network when you're finished. Note also that when you do this you will not be able to download the Readme file to the z:\ drive which is a network drive on the campus network so you will have to change to the d:\ drive before connecting to the FTP server by typing d: and pressing enter at the command prompt.
  19. Lab 11.2.4.6: Accessing Network Devices with SSH
  20. Lab 11.2.4.8: Securing Network Devices
  21. Lab 11.2.5.8: Managing Router Configuration Files with Tera Term
  22. Lab 11.2.5.9: Managing Router Configuration Files Using TFTP, Flash, and USB
  23. Lab 11.3.2.3: Testing Network Latency with Ping and Traceroute
  24. Lab 11.3.4.6: Using the CLI to Gather Network Device Information
    • Note: This lab appears to have been left out of the printed lab manual so you will need to access it from the readings for the chapter as a PDF file.

Homework

Any homework assigned in the course will go here. This falls into the Labs/Homework category of your course grade. Remember, for homework assignments turn in the actual pages from your lab book or printouts from the curriculum and not a lab report. Homework assignment are individual, you and your lab partner need to both turn them in separately even if you work on them together.

  1. Lab 7.1.2.8: Using the Windows Calculator with Network Addresses (5 points)
  2. Lab 7.1.2.9: Converting IPv4 Addresses to Binary (5 points)
  3. Lab 7.1.4.9: Identifying IPv4 Addresses (5 points)
  4. Lab 7.2.5.3: Identifying IPv6 Addresses (5 points)
  5. Lab 8.1.4.6: Calculating IPv4 Subnets (10 points)
  6. Lab 8.1.4.8: Designing and Implementing a Subnetted IPv4 Addressing Scheme (10 points)
  7. Lab 8.2.1.5: Designing and Implementing a VLSM Addressing Scheme (10 points)
  8. Lab 11.2.5.10: Researching Password Recovery Procedures (5 points)
  • Participate in an online forum discussion (typically 3 quality posts or more) of each chapter on the NetSpace site. See forum posting page for details. (up to 10 points each chapter based on quality)

Participation Activities

Any participation activities completed in the course will go here. This falls into the participation category of your course grade.

  • Complete the online pretest exam (10 points for attempting)
  • Complete the online course feedback form (5 points for completing)
  • Complete the online practice final exam (10 points for attempting)
  • Complete the online practice skills based exam in Packet Tracer (10 points for attempting)
  • Complete the online Chapter 6 Packet Tracer Practice (10 points for attempting)
  • Meet with the instructor once per week to discuss course progress and ask questions (up to 10 points each based on progress)

Unit Assessments

You are responsible for completing all of the online unit assessments listed below. These fall into the online assessments category of your course grade.

  • Chapter 1
  • Chapter 2
  • Chapter 3
  • Chapter 4
  • Chapter 5
  • Chapter 6
  • Chapter 7
  • Chapter 8
  • Chapter 9
  • Chapter 10
  • Chapter 11

Other

You are also responsible for completing these things, see the course syllabus for category and weighting information.

  • Online Final Exam
  • Skills Final Exam

Technical Presentation

In this class you and a partner will need to give a technical presentation on a topic of your choice related to the course. Your brief 10 minute presentation will be given towards the end of the course, see the course calendar for details. Additional details will be provided as the course progresses.

Example Topics Include:

  • History of the Internet
  • IP Addressing (Subnetting, VLSM, IPv6)

Grading

Your presentation grade will be comprised of three main areas, an instructor score, a peer score, and a score for completing quality peer evaluations of each presentation.

The instructor score is comprised of:

  • Topic Content (30 Points)
    • Was the topic appropriate for the course project? Was the content presented accurate and did it provide a good overview of the topic and the work done?
  • Presentation Skills (30 Points)
    • How well did the group do explaining the content? Were they able to adequately answer appropriate questions from the class? Was the presentation professional and well prepared?
  • Engagement (20 Points)
    • How well did the group engage the class in their presentation? This could include getting or asking questions of the class, using appropriate visual aids, etc.
  • Overall Quality (20 Points)
    • Did you learn something or get something clarified in your mind? Did you feel listening to this presentation was worth your time? Was this a “good” presentation?

Peer evaluations will be based on the same areas as the instructor score but the instructor score will be worth 100 points and the peer score (the average of all scores from your peers) worth 10 points of your final grade in this area.

You must complete a peer evaluation for all of the other groups presenting as well. These are graded based on how well you justify (explain) the scores you give in each of the areas as well as if the information you write will be helpful in improving future presentations. Also, do your scores match what you're saying? If you have complaints about the presentation and think there is anything they could have done better they should not be getting a perfect score. Think about how well you feel they met the criteria for each area of the presentation, assign points based on how they did or did not, and make sure you have ample constructive (helpful) comments to back it up.

Skills Final Exam

The Skills Final Exam is designed to test your ability to apply the concepts learned in this class and practiced in labs to common, real-world scenarios.

CCNA 2 Assignments

Labs

You are responsible for completing ALL of these labs. You must submit a lab report for each chapter (you may combine multiple labs from the chapter into a single report). If you work with a partner on a lab you only need to submit a single lab report for the two of you but it must have both your names on it. Each lab report is worth up to 20 points. This falls into the Labs/Homework category of your course grade.

  1. Lab 2.1.1.6: Configuring Basic Switch Settings
    • Note: You should use TeraTerm or PUTTY for telnet access instead of the command line telnet program which is not installed on the lab PCs.
  2. Lab 2.2.4.11: Configuring Switch Security Features
  3. Lab 3.2.2.5: Configuring VLANs and Trunking
  4. Lab 3.2.4.9: Troubleshooting VLAN Configurations
  5. Lab 3.3.2.2: Implementing VLAN Security
  6. Lab 4.1.1.9: Mapping the Internet
    • Note: This lab does not require lab equipment and may be completed at home as you read through the chapter.
  7. Lab 4.1.4.6: Configuring Basic Router Settings with IOS CLI
  8. Lab 4.1.4.7: Configuring Basic Router Settings with CCP
    • Note: Students do not have permission to install software on campus computers, you will need to use a Virtual Machine on your lab computer and run CCP within the VM or install CCP on your own laptop. If you want to run CCP in a VM there is a pre-built VirtualBox template in the "D:\CNT Files" folder which you can import. Make sure to follow the instructions for using VirtualBox on campus including changing the default VM directory.
  9. Lab 5.1.2.4: Configuring Per-Interface Inter-VLAN Routing
    • Note: You can complete this lab in Packet Tracer at home instead of on lab equipment if you'd like
  10. Lab 5.1.3.7: Configuring 802.1Q Trunk-Based Inter-VLAN Routing
  11. Lab 5.3.2.4: Troubleshooting Inter-VLAN Routing
  12. Lab 6.2.2.5: Configuring IPv4 Static and Default Routes
  13. Lab 6.2.4.5: Configuring IPv6 Static and Default Routes
    • Note: You can complete this lab in Packet Tracer at home instead of on lab equipment if you'd like
  14. Lab 6.3.3.7: Designing and Implementing IPv4 Addressing with VLSM
    • Note: You should complete parts 1 & 2 of this lab at home before coming in to configure it on part 3, doing this will save you quite a bit of time.
  15. Lab 6.5.2.5: Troubleshooting IPv4 and IPv6 Static Routes
  16. Lab 7.3.2.4: Configuring Basic RIPv2 and RIPng
  17. Lab 8.2.4.5: Configuring Basic Single-Area OSPFv2
    • Note: There is a typo in this lab the command in Part 4, Step 2g should be "show ip ospf neighbor" not "show ipv6 ospf neighbor".
  18. Lab 8.3.3.6: Configuring Basic Single-Area OSPFv3
  19. Lab 9.2.2.7: Configuring and Verifying Standard ACLs
    • Note: In this lab you are asked to configure the EIGRP routing protocol which you have not yet learned to do, please use the OSPF routing protocol instead.
  20. Lab 9.2.3.4: Configuring and Verifying VTY Restrictions
  21. Lab 9.3.2.13: Configuring and Verifying Extended ACLSs
    • Note: You can complete this lab in Packet Tracer at home instead of on lab equipment if you'd like
  22. Lab 9.4.2.7: Troubleshooting ACL Configuration and Placement
    • Note: You can complete this lab in Packet Tracer at home instead of on lab equipment if you'd like
  23. Lab 9.5.2.7: Configuring and Verifying IPv6 ACLs
    • Note: You can complete this lab in Packet Tracer at home instead of on lab equipment if you'd like
  24. Lab 10.1.2.4: Configuring Basic DHCPv4 on a Router
    • Note: In this lab you are asked to configure the EIGRP routing protocol which you have not yet learned to do, the commands for configuring it are included in the lab but if you prefer you can use the OSPF routing protocol instead.
    • Note 2: In Part 2, step 4e, the show run interface command should be run on R1 and not R2. The DHCP relay configuration in on R1 and not R2.
  25. Lab 10.1.2.5: Configuring Basic DHCPv4 on a Switch
  26. Lab 10.1.4.4: Troubleshooting DHCPv4
    • Note: If you do not receive debug output in your console perhaps you have telnetted into your router. By default debug output is only sent to a computer directly connected to the console port, if you want to see debug information through a telnet session you need to enter the "terminal monitor" command.
  27. Lab 10.2.3.5: Configuring Stateless and Stateful DHCPv6
    • Note: You can complete this lab in Packet Tracer at home instead of on lab equipment if you'd like
  28. Lab 10.2.4.4: Troubleshooting DHCPv6
    • Note: You can complete this lab in Packet Tracer at home instead of on lab equipment if you'd like
  29. Lab 11.2.2.6: Configuring Dynamic and Static NAT
  30. Lab 11.2.3.7: Configuring NAT Pool Overload and PAT
  31. Lab 11.3.1.5: Troubleshooting NAT Configurations

Homework

Any homework assigned in the course will go here. This falls into the Labs/Homework category of your course grade. Remember, for homework assignments turn in the actual pages from your lab book or printouts from the curriculum and not a lab report. Homework assignment are individual, you and your lab partner need to both turn them in separately even if you work on them together.

  • Lab 6.4.2.5: Calculating Summary Routes with IPv4 and IPv6 (10 points)
  • Participate in an online forum discussion (typically 3 quality posts or more) of each chapter on the NetSpace site. See forum posting page for details. (up to 10 points each chapter based on quality)

Participation Activities

Any participation activities completed in the course will go here. This falls into the participation category of your course grade.

  • Complete the online pre-test (10 points for attempting)
  • Complete the online course feedback form (5 points for completing)
  • Complete the online practice final exam (10 points for attempting)
  • Complete the online ICND1 practice test (10 points for attempting)
  • Chapter 2 PT Skills Exam (10 points for attempting)
  • Chapter 6 PT Skills Exam (10 points for attempting)
  • Complete the packet tracer practice final skills exam "RSE Practice Skills Exam - PT" (10 points for attempting)
  • Meet with the instructor once per week to discuss course progress and ask questions (up to 10 points each based on progress)

Unit Assessments

You are responsible for completing all of the online unit assessments listed below. These fall into the online assessments category of your course grade.

  • Chapter 1
  • Chapter 2
  • Chapter 3
  • Chapter 4
  • Chapter 5
  • Chapter 6
  • Chapter 7
  • Chapter 8
  • Chapter 9
  • Chapter 10
  • Chapter 11

Other

You are also responsible for completing these things, see the course syllabus for category and weighting information.

  • Online Final Exam
  • Skills Final Exam

Technical Presentation

In this class you and a partner will need to give a technical presentation on a topic of your choice related to the course. Your brief 10 minute presentation will be given towards the end of the course, see the course calendar for details. Additional details will be provided as the course progresses.

Example Topics Include:

  • History of the Internet
  • IP Addressing (Subnetting, VLSM, IPv6)

Grading

Your presentation grade will be comprised of three main areas, an instructor score, a peer score, and a score for completing quality peer evaluations of each presentation.

The instructor score is comprised of:

  • Topic Content (30 Points)
    • Was the topic appropriate for the course project? Was the content presented accurate and did it provide a good overview of the topic and the work done?
  • Presentation Skills (30 Points)
    • How well did the group do explaining the content? Were they able to adequately answer appropriate questions from the class? Was the presentation professional and well prepared?
  • Engagement (20 Points)
    • How well did the group engage the class in their presentation? This could include getting or asking questions of the class, using appropriate visual aids, etc.
  • Overall Quality (20 Points)
    • Did you learn something or get something clarified in your mind? Did you feel listening to this presentation was worth your time? Was this a “good” presentation?

Peer evaluations will be based on the same areas as the instructor score but the instructor score will be worth 100 points and the peer score (the average of all scores from your peers) worth 10 points of your final grade in this area.

You must complete a peer evaluation for all of the other groups presenting as well. These are graded based on how well you justify (explain) the scores you give in each of the areas as well as if the information you write will be helpful in improving future presentations. Also, do your scores match what you're saying? If you have complaints about the presentation and think there is anything they could have done better they should not be getting a perfect score. Think about how well you feel they met the criteria for each area of the presentation, assign points based on how they did or did not, and make sure you have ample constructive (helpful) comments to back it up.

Skills Final Exam

The Skills Final Exam is designed to test your ability to apply the concepts learned in this class and practiced in labs to common, real-world scenarios.

Return to ITC-2515 Homepage

Retrieved from "https://wiki.ihitc.net/mediawiki/index.php?title=Franske_ITC-2515_Assignments&oldid=7121"