Franske CNT-2612 Labs and Homework: Difference between revisions

Revision as of 19:39, 30 January 2012

Lab 1-1 AND Lab 1-2 (One lab report for both) - Clearing Switches
Lab 2-1: VLANs
- Lab Errata: In this lab you are asked to shut down vlan 120 on one of the ALS systems. You will not be able to do this following the instructions in the lab because ALS is setup in VTP Client mode. Instead you can issue shutdown vlan 120 in the global config mode on the ALS switch which has the effect they are looking for (only locally disabling the vlan) or run the commands as indicated in the lab but on the DLS VTP Server. The goal here is to see the difference between shutting down a vlan (local to the switch) and suspending a vlan (global across VTP domain).
Lab 2-2: Etherchannel
Lab 3-1: Default STP
Lab 3-2: Modifying STP
Lab 3-3: PVST STP
Lab 3-4: MST STP
Lab 4-1: Inter-VLAN Routing
Lab 4-2: Inter-VLAN CEF Routing
Lab 4-3: VLAN Case Study
Lab 5-1: HSRP
Lab 5-2: IP SLA
Lab 6-1: Securing Layer 2
Lab 6-2: Securing STP
Lab 6-3: Securing VLANs
Lab 7-1: IP Telephony Support
Lab 7-2: Wireless Support
Lab 7-3: Voice Security Case Study

@@ Line 1: / Line 1: @@
 * Lab 1-1 AND Lab 1-2 (One lab report for both) - Clearing Switches
 * Lab 2-1: VLANs
+** Lab Errata: In this lab you are asked to shut down vlan 120 on one of the ALS systems. You will not be able to do this following the instructions in the lab because ALS is setup in VTP Client mode. Instead you can issue '''shutdown vlan 120''' in the global config mode on the ALS switch which has the effect they are looking for (only locally disabling the vlan) or run the commands as indicated in the lab but on the DLS VTP Server. The goal here is to see the difference between shutting down a vlan (local to the switch) and suspending a vlan (global across VTP domain).
 * Lab 2-2: Etherchannel
 * Lab 3-1: Default STP