Resetting Switch Configuration Including VLAN Configuration Files
Revision as of 14:29, 9 December 2010 by Jasonredlin (talk | contribs) (Created page with ' == Resetting Switch Configuration Including VLAN Configuration Files == To reset a switch to factory default settings use the '''erase statup-config''' or '''write erase''' co…')
Resetting Switch Configuration Including VLAN Configuration Files
To reset a switch to factory default settings use the erase statup-config or write erase command. These commands will not clear config-register or boot system settings. Boot su=ystem parameters are modified by using the boot command.
1. Enter the write erase command from priveleged EXEC mode. If you don't have access to priveleged EXEC mode you must use the password recovery process first.