Install audio card

From ITCwiki
Revision as of 03:17, 29 July 2010 by Stam0117 (talk | contribs)
Jump to navigation Jump to search

This page will demonstrate how to install an audio card and configure it to work with recording software. In this tutorial, I will be using the M-Audio Delta AP192 1/2 audio card.

Installing Audio Card

  • Step 1

Install the audio card into the appropriate expansion slot.

  • Step 2

Secure the audio card to the case with the mounting bracket.

  • Step 3

After reassembling your computer, power up and install driver CD-ROM.

  • Step 4

After installation of drivers is complete, check the device manager to verify that installation was successful.

Start>Right click My Computer>Manage>Device Manager

Device manager.70.jpg

Configure Windows to Sound Device

  • Step 1

Start>Control Panel>Sounds and Audio Devices>Audio Tab

Change the default devices to the appropriate audio card.

Sound audio devices.70.jpg

  • Step 2

Set the sample rate

Start>Control Panel>M-Audio Delta Audio icon>Hardware Settings tab

Set Codec Sample Rate to 44,100.

M audio cp.70.jpg

Cb1.70.jpg