Install audio card: Difference between revisions

From ITCwiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 11: Line 11:


Install the audio card into the appropriate expansion slot.
Install the audio card into the appropriate expansion slot.
[[File:pci slot.jpg]]


*'''Step 2'''
*'''Step 2'''

Revision as of 20:06, 29 July 2010

CNT2300-91 Service Project

By Dave Stammler


This page will demonstrate how to install an audio card and configure it to work with recording software. In this tutorial, I will be using the M-Audio Delta AP192 1/2 audio card and Cubase recording software.

Installing Audio Card

  • Step 1

Install the audio card into the appropriate expansion slot.

Pci slot.jpg

  • Step 2

Secure the audio card to the case with the mounting bracket.

  • Step 3

After reassembling your computer, power up and install driver CD-ROM.

  • Step 4

After installation of drivers is complete, check the device manager to verify that installation was successful.

Start>Control Panel>System>Hardware tab>Device Manager


Device manager.70.jpg

Configure Windows to Sound Device

  • Step 1

Start>Control Panel>Sounds and Audio Devices>Audio Tab

Change the default devices to the appropriate audio card.


Sound audio devices.70.jpg


  • Step 2

Set the sample rate

Start>Control Panel>M-Audio Delta Audio icon>Hardware Settings tab

Set Codec Sample Rate to 44,100.


M audio cp.70.jpg


Configure Recording Software

  • Step 1

Open a new session of Cubase

  • Step 2

Click on Devices in the tool bar.

Select Device Setup.


Cb1.70.jpg


  • Step 3

Select VST Multitrack

Under Setup tab, select the M-Audio Delta ASIO Driver from the drop down menu.


Cb2.70.jpg


The audio card is now configured to the recording software. Rock n' Roll!