ITC-2300 VoIP Lab Sample pjsip.conf File: Difference between revisions

From ITCwiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 39: Line 39:
mailboxes=2903@default
mailboxes=2903@default
</pre>
</pre>
=DPMA pjsip.conf File Changes=
In order to use the DPMA with the chan_pjsip module a default_outbound_endpoint needs to be enabled in pjsip.conf. This is accomplised by configuring a basic endpoint to use and then setting that endpoint as the default.
For Example:
<pre>
[global]
type=global
default_outbound_endpoint=dpma_endpoint
[dpma_endpoint]
type=endpoint
</pre>
=Additional Resources=
=Additional Resources=
* [https://wiki.asterisk.org/wiki/display/AST/PJSIP+Configuration+Sections+and+Relationships PJSIP Config Sections and Relationships]
* [https://wiki.asterisk.org/wiki/display/AST/PJSIP+Configuration+Sections+and+Relationships PJSIP Config Sections and Relationships]
* [https://wiki.asterisk.org/wiki/display/AST/Asterisk+12+Configuration_res_pjsip Core PJSIP Configuration Options]
* [https://wiki.asterisk.org/wiki/display/AST/Asterisk+12+Configuration_res_pjsip Core PJSIP Configuration Options]

Revision as of 00:39, 6 November 2019

The following shows an example of the things you may need to change in your pjsip.conf file.

Example Minimal pjsip.conf File Changes

[simpletrans]
type=transport
protocol=udp
bind=0.0.0.0

[2903] ; The value inside the [] will be the username on the device
type=endpoint
context=default
disallow=all
allow=ulaw
transport=simpletrans
auth=debra-auth ; This will be the name for the authentication section of the configuration found below
aors=2903 ; This will be the name for the AoRs registration section of the configuration found below it must match the username in the [ ] above
trust_id_outbound=yes
callerid=Debra Donaldson <2903> ; This is the caller ID name and extension (in the < >)

[2903] ; This is the AoRs registration entry. The value in the [ ] must match the endpoint aors line and username in the [ ]
type=aor
max_contacts=1

[debra-auth] ; This is the authentication entry. The value in the [ ] must match the endpoint auth line
type=auth
auth_type=userpass
password=debrapass ; This is the authentication name used by the endpoint
username=debra ; This is the authentication password used by the endpoint

Voicemail pjsip.conf File Changes

You can add the ability to enable the Message Waiting Indicator (MWI) lamp on SIP phones when there is a message in a mailbox. By default Asterisk will send SIP NOTIFY messages when a voicemail is left. Some phones need to subscribe to the MWI information. In that case you need to modify the AoRs section for the phone and add a mailboxes= section.

For Example:

[2903]
type=aor
max_contacts=1
mailboxes=2903@default

DPMA pjsip.conf File Changes

In order to use the DPMA with the chan_pjsip module a default_outbound_endpoint needs to be enabled in pjsip.conf. This is accomplised by configuring a basic endpoint to use and then setting that endpoint as the default.

For Example:

[global]
type=global
default_outbound_endpoint=dpma_endpoint

[dpma_endpoint]
type=endpoint

Additional Resources