ISDN WAN Connections

From ITCwiki
Revision as of 14:38, 10 May 2010 by JDO2010 (talk | contribs) (Created page with '=Basic Rate Interface (BRI)= This was set up in a lab enviroment using an Adtran Atlas 550 to simulate WAN connection. This will document configuring an ISDN BRI connection with…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Basic Rate Interface (BRI)

This was set up in a lab enviroment using an Adtran Atlas 550 to simulate WAN connection. This will document configuring an ISDN BRI connection with dial-on-demand routing (DDO), RIP routing over ISDN, and B channel aggragation.

Configuring BRI

  1. Basic Router Configuration
  2. Configure the router to use the approiate ISDN switch type

This configuration uses the basic-ni switch type. To learn about the other switch type go to ISDN Switch Types

Retrieved from "https://wiki.ihitc.net/mediawiki/index.php?title=ISDN_WAN_Connections&oldid=1940"