Franske ITC-2516 Assignments: Difference between revisions

From ITCwiki
Jump to navigation Jump to search
 
(13 intermediate revisions by the same user not shown)
Line 4: Line 4:


===Packet Tracer Online Submissions===
===Packet Tracer Online Submissions===
Each of these activities will be submitted using the Packet Tracer ScoreUP Online Submission process and by attaching a copy of your completed Packet Tracer file to the activity on NetSpace. Points will be earned for each submitted activity based on correctness and completion of the activity. You will see a completion percentage for each activity in the Packet Tracer software before submitting. Remember to submit both through ScoreUP inside of Packet Tracer and by uploading a copy of your finished activity file to NetSpace.
Each of these activities will be submitted using the Packet Tracer ScoreUP Online Submission process. Points will be earned for each submitted activity based on correctness and completion of the activity. You will see a completion percentage for each activity in the Packet Tracer software before submitting. Remember to submit through ScoreUP inside of Packet Tracer and to save for yourself a copy of your finished activity file in case it's requested by your instructor.


# PT 2.5.5 - Configure Initial Switch Settings (5 points)
# PT 2.5.5 - Configure Initial Switch Settings (5 points)
Line 31: Line 31:
===Lab Reports===
===Lab Reports===
For each module having lab activities you will need to submit one [[Franske Lab Report Format|lab report]] which covers all of the lab activities listed below in the module. Submissions are made through the NetSpace site. You do not need to submit answers to the questions in the activities, those are for your own learning use only. Lab activities may include remote equipment access, campus equipment, or packet tracer activities. If you work with a partner on a lab you only need to submit a single lab report for the two of you but it must have both your names on it. Each lab report is worth up to 20 points.
For each module having lab activities you will need to submit one [[Franske Lab Report Format|lab report]] which covers all of the lab activities listed below in the module. Submissions are made through the NetSpace site. You do not need to submit answers to the questions in the activities, those are for your own learning use only. Lab activities may include remote equipment access, campus equipment, or packet tracer activities. If you work with a partner on a lab you only need to submit a single lab report for the two of you but it must have both your names on it. Each lab report is worth up to 20 points.
'''Note:''' The password for CAASP Pod PCs in Netlab is: Cisco123
'''Note:''' The password for Internet Pod PCs in Netlab is: netlab


# PT 2.3.7 - Navigate the IOS
# PT 2.3.7 - Navigate the IOS
# Lab 2.3.8 - Navigate the IOS by Using Tera Term for Console Connectivity (SKIP for Fall 2020)
# Lab 2.3.8 - Navigate the IOS by Using Tera Term for Console Connectivity
#* '''Fall 2020 Note:''' Skip this lab for Fall 2020
#* The password for the PCs in this lab is: Cisco123
# Lab 2.9.2 - Basic Switch and End Device Configuration (SKIP for Fall 2020)
# Lab 2.9.2 - Basic Switch and End Device Configuration
#* '''Fall 2020 Note:''' Skip this lab for Fall 2020
#* The password for the PCs in this lab is: Cisco123
# PT 3.5.5 - Investigate the TCP/IP and OSI Models in Action
# PT 3.5.5 - Investigate the TCP/IP and OSI Models in Action
# Lab 3.7.9 - Install Wireshark
#* '''Fall 2020 Note:''' Skip this lab for Fall 2020 and instead verify that you can access the remote virtual machines and run the pre-installed Wireshark software, [https://youtu.be/99BTSzZ_uHw see details in this video]
# Lab 3.7.10 - Use Wireshark to View Network Traffic
# Lab 3.7.10 - Use Wireshark to View Network Traffic
#* '''Fall 2020 Note:''' This lab can be completed on ITC remote virtual machines,  use PC-C from two different pods which are the ones that will have Internet access. [https://youtu.be/99BTSzZ_uHw see details in this video], you will not have a partner so for this lab you should use two separate virtual machines and act as your own partner
#* The password for the PCs in this lab is: netlab
# Lab 4.6.6 - View Wired and Wireless NIC Information
# Lab 4.6.6 - View Wired and Wireless NIC Information
#* '''Fall 2020 Note:''' complete Lab 4.6.6 using your home computer
#* The password for the PCs in this lab is: netlab
#* '''Note:''' Use your own computer for the wireless portion, the lab computers only have wired connections
# Lab 7.1.6 - Use Wireshark to Examine Ethernet Frames
# Lab 7.1.6 - Use Wireshark to Examine Ethernet Frames
#* '''Fall 2020 Note:''' This lab can be completed on ITC remote virtual machines, use PC-C from the pods which is one that will have Internet access.
#* The password for the PCs in this lab is: netlab
# Lab 7.2.7 - View Network Device MAC Addresses
# Lab 7.2.7 - View Network Device MAC Addresses
#* '''Fall 2020 Note:''' This lab can be completed on ITC remote virtual machines, use PC-A from the pods which is one that connects to S1 port Fa0/6.
# Lab 7.3.7 - View the Switch MAC Address Table
# Lab 7.3.7 - View the Switch MAC Address Table
#* '''Fall 2020 Note:''' This lab can be completed on ITC remote virtual machines, use PC-A and PC-B from the pods which is one that connects to S1 port Fa0/6.
# PT 9.1.3 - Identify MAC and IP Addresses
# PT 9.1.3 - Identify MAC and IP Addresses
# PT 9.2.9 - Examine the ARP Table
# PT 9.2.9 - Examine the ARP Table
Line 64: Line 65:
# Lab 17.7.6 - Troubleshoot Connectivity Issues
# Lab 17.7.6 - Troubleshoot Connectivity Issues
# Lab 17.8.1 - Design and Build a Small Business Network
# Lab 17.8.1 - Design and Build a Small Business Network
#* '''Note:''' Design your network in the Packet Tracer Software, in addition to your lab report upload your Packet Tracer File to the Netacad site for this assignment.


===Homework===
===Homework===
Homework activities will require submitting the actual answers to each question in the activity and may require showing your work as well. Homework assignment are individual, you and your lab partner need to both turn them in separately even if you work on them together.
Homework activities will require submitting the actual answers to each question in the activity and may require showing your work as well. Homework assignment are individual, you and your lab partner need to both turn them in separately even if you work on them together.


* Lab 11.6.6 - Calculate IPv4 Subnets (10 Points)
* Lab 11.6.6 - Calculate IPv4 Subnets (10 Points) - This activity will be submitted as a "quiz" on the Netacad site where you will enter some of your answers from the activity into the quiz.
* Lab 11.10.2 - Design and Implement a VLSM Addressing Scheme (10 Points)
* Lab 11.10.2 - Design and Implement a VLSM Addressing Scheme (10 Points) - This activity will be submitted as a "quiz" on the Netacad site where you will enter some of your answers from the activity into the quiz.
* Lab 12.7.4 - Identify IPv6 Addresses (10 Points)
* Lab 12.7.4 - Identify IPv6 Addresses (10 Points) - This activity will be submitted as a "quiz" on the Netacad site where you will enter some of your answers from the activity into the quiz.
* Participate in an online forum discussion (typically 3 quality posts or more) of each chapter on the NetSpace site. See [[Franske Forum Posting Format|forum posting page]] for details. (up to 10 points each chapter based on quality)
* Participate in an online forum discussion (typically 3 quality posts or more) of each module on the Cisco Netacad site. See [[Franske Forum Posting Format|forum posting page]] for details. (up to 10 points each module based on quality)


==Participation Activities==
==Participation Activities==
Any participation activities completed in the course will go here. This falls into the participation category of your course grade.
Any participation activities completed in the course will go here. This falls into the participation category of your course grade.
* Complete the system test exam (5 points for completing)
* Complete the online course feedback form (5 points for completing)
* Complete the online course feedback form (5 points for completing)
* Complete the online practice final exam (10 points for attempting)
* Complete the online practice final exam (10 points for attempting)
Line 146: Line 149:
#* NOTE: In this lab you need to start by loading a starting configuration onto your network devices. [[CCNA 2 v7 Lab 4.4.9 Starting Configurations|Click here to obtain the starting configurations.]]
#* NOTE: In this lab you need to start by loading a starting configuration onto your network devices. [[CCNA 2 v7 Lab 4.4.9 Starting Configurations|Click here to obtain the starting configurations.]]
# Lab 4.5.2 - Implement Inter-VLAN Routing
# Lab 4.5.2 - Implement Inter-VLAN Routing
# PT 5.1.9 - Investigate STP Loop Prevention
# Lab 6.4.2 - Implement EtherChannel
# Lab 6.4.2 - Implement EtherChannel
# Lab 7.4.2 - Implement DHCPv4
# Lab 7.4.2 - Implement DHCPv4
Line 161: Line 165:
# Lab 11.6.2 - Switch Security Configuration
# Lab 11.6.2 - Switch Security Configuration
# Lab 13.1.11 - Configure a Wireless Network
# Lab 13.1.11 - Configure a Wireless Network
#* '''FALL 2021 NOTE:''' Complete the Packet Tracer version of this lab this year, wireless networking is not supported on Netlab. You should still submit a lab report as normal for this PT lab.
#* '''NOTE:''' Change the router settings as indicated in the lab, use these for the NEW settings:
#* '''NOTE:''' Change the router settings as indicated in the lab, use these for the NEW settings:
#** Router IP Address: 172.17.99.1
#** Router IP Address: 172.17.99.1
Line 176: Line 181:
# Lab 16.3.2 - Troubleshoot Static and Default Routes
# Lab 16.3.2 - Troubleshoot Static and Default Routes
#* NOTE: In this lab you need to start by loading a starting configuration onto your network devices. [[CCNA 2 v7 Lab 16.3.2 Starting Configurations|Click here to obtain the starting configurations.]]
#* NOTE: In this lab you need to start by loading a starting configuration onto your network devices. [[CCNA 2 v7 Lab 16.3.2 Starting Configurations|Click here to obtain the starting configurations.]]
===Homework===
Homework activities will require submitting the actual answers to each question in the activity and may require showing your work as well. Homework assignment are individual, you and your lab partner need to both turn them in separately even if you work on them together.
* Participate in an online forum discussion (typically 3 quality posts or more) of each module on the Cisco Netacad site. See [[Franske Forum Posting Format|forum posting page]] for details. (up to 10 points each module based on quality)


==Participation Activities==
==Participation Activities==

Latest revision as of 21:07, 29 January 2022

CCNA 1 Assignments

Labs & Homework

Packet Tracer Online Submissions

Each of these activities will be submitted using the Packet Tracer ScoreUP Online Submission process. Points will be earned for each submitted activity based on correctness and completion of the activity. You will see a completion percentage for each activity in the Packet Tracer software before submitting. Remember to submit through ScoreUP inside of Packet Tracer and to save for yourself a copy of your finished activity file in case it's requested by your instructor.

  1. PT 2.5.5 - Configure Initial Switch Settings (5 points)
  2. PT 2.7.6 - Implement Basic Connectivity (5 points)
  3. PT 2.9.1 - Basic Switch and End Device Configuration (5 points)
  4. PT 4.6.5 - Connect a Wired and Wireless LAN (5 points)
  5. PT 4.7.1 - Connect the Physical Layer (5 points)
  6. PT 10.1.4 - Configure Initial Router Settings (5 points)
  7. PT 10.3.4 - Connect a Router to a LAN (5 points)
  8. PT 10.3.5 - Troubleshoot Default Gateway Issues (5 points)
  9. PT 10.4.3 - Basic Device Configuration (5 points)
  10. PT 11.5.5 - Subnet and IPv4 Network (5 points)
  11. PT 11.7.5 - Subnetting Scenario (5 points)
  12. PT 11.9.3 - VLSM Design and Implementation Practice (5 points)
  13. PT 11.10.1 - Design and Implement a VLSM Addressing Scheme (5 points)
  14. PT 12.6.6 - Configure IPv6 Addressing (5 points)
  15. PT 12.9.1 - Implement a Subnetted IPv6 Addressing Scheme (5 points)
  16. PT 13.2.7 - Use Ping and Traceroute to Test Network Connectivity (5 points)
  17. PT 13.3.1 - Use ICMP to Test and Correct Network Connectivity (5 points)
  18. PT 16.4.6 - Configure Secure Passwords and SSH (5 points)
  19. PT 16.5.1 - Secure Network Devices (5 points)
  20. PT 17.7.7 - Troubleshoot Connectivity Issues (5 points)
  21. PT 17.8.2 - Skills Integration Challenge (15 points)
  22. PT 17.8.3 - Troubleshooting Challenge (15 points)

Lab Reports

For each module having lab activities you will need to submit one lab report which covers all of the lab activities listed below in the module. Submissions are made through the NetSpace site. You do not need to submit answers to the questions in the activities, those are for your own learning use only. Lab activities may include remote equipment access, campus equipment, or packet tracer activities. If you work with a partner on a lab you only need to submit a single lab report for the two of you but it must have both your names on it. Each lab report is worth up to 20 points.

Note: The password for CAASP Pod PCs in Netlab is: Cisco123

Note: The password for Internet Pod PCs in Netlab is: netlab

  1. PT 2.3.7 - Navigate the IOS
  2. Lab 2.3.8 - Navigate the IOS by Using Tera Term for Console Connectivity
    • The password for the PCs in this lab is: Cisco123
  3. Lab 2.9.2 - Basic Switch and End Device Configuration
    • The password for the PCs in this lab is: Cisco123
  4. PT 3.5.5 - Investigate the TCP/IP and OSI Models in Action
  5. Lab 3.7.10 - Use Wireshark to View Network Traffic
    • The password for the PCs in this lab is: netlab
  6. Lab 4.6.6 - View Wired and Wireless NIC Information
    • The password for the PCs in this lab is: netlab
    • Note: Use your own computer for the wireless portion, the lab computers only have wired connections
  7. Lab 7.1.6 - Use Wireshark to Examine Ethernet Frames
    • The password for the PCs in this lab is: netlab
  8. Lab 7.2.7 - View Network Device MAC Addresses
  9. Lab 7.3.7 - View the Switch MAC Address Table
  10. PT 9.1.3 - Identify MAC and IP Addresses
  11. PT 9.2.9 - Examine the ARP Table
  12. PT 9.3.4 - IPv6 Neighbor Discovery
  13. Lab 10.4.4 - Build a Switch and Router Network
  14. Lab 12.9.2 - Configure IPv6 Addresses on Network Devices
  15. PT 13.2.6 - Verify IPv4 and IPv6 Addressing
  16. Lab 13.3.2 - Use Ping and Traceroute to Test Network Connectivity
  17. PT 14.8.1 - TCP and UDP Communications
  18. Lab 15.4.8 - Observe DNS Resolution
  19. Lab 16.4.7 - Configure Network Devices with SSH
  20. Lab 16.5.2 - Secure Network Devices
  21. PT 17.5.9 - Interpret Show Command Output
  22. Lab 17.7.6 - Troubleshoot Connectivity Issues
  23. Lab 17.8.1 - Design and Build a Small Business Network
    • Note: Design your network in the Packet Tracer Software, in addition to your lab report upload your Packet Tracer File to the Netacad site for this assignment.

Homework

Homework activities will require submitting the actual answers to each question in the activity and may require showing your work as well. Homework assignment are individual, you and your lab partner need to both turn them in separately even if you work on them together.

  • Lab 11.6.6 - Calculate IPv4 Subnets (10 Points) - This activity will be submitted as a "quiz" on the Netacad site where you will enter some of your answers from the activity into the quiz.
  • Lab 11.10.2 - Design and Implement a VLSM Addressing Scheme (10 Points) - This activity will be submitted as a "quiz" on the Netacad site where you will enter some of your answers from the activity into the quiz.
  • Lab 12.7.4 - Identify IPv6 Addresses (10 Points) - This activity will be submitted as a "quiz" on the Netacad site where you will enter some of your answers from the activity into the quiz.
  • Participate in an online forum discussion (typically 3 quality posts or more) of each module on the Cisco Netacad site. See forum posting page for details. (up to 10 points each module based on quality)

Participation Activities

Any participation activities completed in the course will go here. This falls into the participation category of your course grade.

  • Complete the system test exam (5 points for completing)
  • Complete the online course feedback form (5 points for completing)
  • Complete the online practice final exam (10 points for attempting)
  • Meet with the instructor once per week to discuss course progress and ask questions (up to 10 points each based on progress)

Unit Assessments

You are responsible for completing all of the online unit assessments listed below. Multiple modules are included in single exams. These exams fall into the online assessments category of your course grade.

  • Modules 1 - 3: Basic Network Connectivity and Communications Exam
  • Modules 4 - 7: Ethernet Concepts Exam
  • Modules 8 - 10: Communicating Between Networks Exam
  • Modules 11 - 13: IP Addressing Exam
  • Modules 14 - 15: Network Application Communications Exam
  • Modules 16 - 17: Building and Securing a Small Network Exam

Skills Final Exam

The Skills Final Exam is designed to test your ability to apply the concepts learned in this class and practiced in labs to common, real-world scenarios. There are two parts to this portion of your grade.

  • Half of your grade in this category will be based on successfully completing all parts of the online Packet Tracer Practice Skills Exam at home. You grade will be based on correctly completing all parts of the activity. You will be able to use outside resources for this part of the exam.
  • Half of your grade in this category will be based on completing a lab equipment skills exam. You will not be able to use any resources other than those specified by your instructor on this part of the exam.

Online Final Exam

You will need to complete an online final exam on the NetSpace site.

CCNA 2 Assignments

Labs & Homework

Packet Tracer Online Submissions

Each of these activities will be submitted using the Packet Tracer ScoreUP Online Submission process. Points will be earned for each submitted activity based on correctness and completion of the activity. You will see a completion percentage for each activity in the Packet Tracer software before submitting.

  1. PT 1.3.6 - Configure SSH (5 points)
  2. PT 1.4.7 - Configure Router Interfaces (5 points)
  3. PT 1.6.1 - Implement a Small Network (5 points)
  4. PT 3.3.12 - VLAN Configuration (5 points)
  5. PT 3.4.5 - Configure Trunks (5 points)
  6. PT 3.5.5 - Configure DTP (5 points)
  7. PT 3.6.1 - Implement VLANs and Trunking (10 points)
  8. PT 4.2.7 - Configure Router-on-a-Stick Inter-VLAN Routing (5 points)
  9. PT 4.3.8 - Configure Layer 3 Switching and Inter-VLAN Routing (5 points)
  10. PT 4.4.8 - Troubleshoot Inter-VLAN Routing (10 points)
  11. PT 4.5.1 - Inter-VLAN Routing Challenge (10 points)
  12. PT 6.2.4 - Configure EtherChannel (5 points)
  13. PT 6.3.4 - Troubleshoot EtherChannel (5 points)
  14. PT 6.4.1 - Implement EtherChannel (5 points)
  15. PT 7.2.10 - Configure DHCPv4 (5 points)
  16. PT 7.4.1 - Implement DHCPv4 (5 points)
  17. PT 9.3.3 - HSRP Configuration Guide (5 points)
  18. PT 11.1.10 - Implement Port Security (5 points)
  19. PT 11.6.1 - Switch Security Configuration (5 points)
  20. PT 13.1.10 - Configure a Wireless Network (5 points)
  21. PT 13.2.7 - Configure a Basic WLAN on the WLC (10 points)
  22. PT 13.3.12 - Configure a WPA2 Enterprise WLAN on the WLC (7 points)
  23. PT 13.4.5 - Troubleshoot WLAN Issues (7 points)
  24. PT 13.5.1 - WLAN Configuration (5 points)
  25. PT 14.3.5 - Basic Router Configuration Review (5 points)
  26. PT 15.6.1 - Configure IPv4 and IPv6 Static and Default Routes (10 points)
  27. PT 16.3.1 - Troubleshoot Static and Default Routes (10 points)

Lab Reports

For each chapter having lab activities you will need to submit one lab report which covers all of the lab activities listed below in the chapter. You do not need to submit answers to the questions in the activities, those are for your own learning use only. Lab activities may include remote equipment access, campus equipment, or packet tracer activities. If you work with a partner on a lab you only need to submit a single lab report for the two of you but it must have both your names on it. Each lab report is worth up to 20 points.

  1. Lab 1.1.7 - Basic Switch Configuration
  2. PT 1.5.10 - Verify Directly Connected Networks
  3. Lab 1.6.2 - Configure Basic Router Settings
  4. PT 3.1.4 - Who Hears the Broadcast?
  5. PT 3.2.8 - Investigate a VLAN Implementation
  6. Lab 3.4.6 - Configure VLANs and Trunking
  7. Lab 3.6.2 - Implement VLANs and Trunking
  8. Lab 4.2.8 - Configure Router-on-a-Stick Inter-VLAN Routing
  9. Lab 4.4.9 - Troubleshoot Inter-VLAN Routing
  10. Lab 4.5.2 - Implement Inter-VLAN Routing
  11. PT 5.1.9 - Investigate STP Loop Prevention
  12. Lab 6.4.2 - Implement EtherChannel
  13. Lab 7.4.2 - Implement DHCPv4
    • NOTE: This lab contains substantial errors! Please make these corrections to your lab before starting:
      1. In Part 1, Step 1a DO NOT "Record the second IP address in the Address Table for S1 VLAN 200 and enter the associated default gateway." this text is an error, you will not use the second IP address from Subnet A for anything special.
      2. In Part 1, Step 1b there is no place in the address table to record an address for S1 VLAN 1. Instead you should "Record the second IP address in the Address Table for S1 VLAN 200 and enter the associated default gateway."
      3. In Part 1, Step 1c You should "Record the second IP address in the Address Table for S2 VLAN 1 and enter the associated default gateway." even though the lab does not mention this.
      4. In Part 1, Step 5c you are asked to configure default routes on each router but we have not learned how to do this yet. We'll learn about this in module 15. Please enter these commands, one on R1 and one on R2, in the configure terminal mode of the router:
        • R1(config)# ip route 0.0.0.0 0.0.0.0 10.0.0.2
        • R2(config)# ip route 0.0.0.0 0.0.0.0 10.0.0.1
  14. Lab 8.5.1 - Configure DHCPv6
    • NOTE: In Part 1, Step 4b this lab asks you to configure a default route on each router pointed towards the other router. We haven't learned how to configure default routes yet though so you can run the following configuration commands (one on R1 and one on R2) to fix this.
      • R1(config)# ipv6 route ::/0 2001:db8:acad:2::2
      • R2(config)# ipv6 route ::/0 2001:db8:acad:2::1
  15. Lab 11.6.2 - Switch Security Configuration
  16. Lab 13.1.11 - Configure a Wireless Network
    • FALL 2021 NOTE: Complete the Packet Tracer version of this lab this year, wireless networking is not supported on Netlab. You should still submit a lab report as normal for this PT lab.
    • NOTE: Change the router settings as indicated in the lab, use these for the NEW settings:
      • Router IP Address: 172.17.99.1
      • Router Subnet Mask: 255.255.255.0
      • Router Name: CCNA-Rxx (replace xx with the number of one of your PCs, found on a sticker on top of the classroom PC under your #desk)
      • DHCP Starting IP Address: 172.17.99.21
      • DHCP Maximum Number of Users: 20
      • Router Username: admin
      • Password: Password123!
      • Wireless SSID: CCNA-Wxx (replace xx with the number of one of your PCs, found on a sticker on top of the classroom PC under your desk)
      • Wireless Passphrase: Cisco456!
    • NOTE: Do not complete Part 4 of this lab which is listed as optional.
    • NOTE: Before packing up your equipment be sure to reset your router back to factory defaults
  17. Lab 15.6.2 - Configure IPv4 and IPv6 Static and Default Routes
  18. Lab 16.3.2 - Troubleshoot Static and Default Routes

Homework

Homework activities will require submitting the actual answers to each question in the activity and may require showing your work as well. Homework assignment are individual, you and your lab partner need to both turn them in separately even if you work on them together.

  • Participate in an online forum discussion (typically 3 quality posts or more) of each module on the Cisco Netacad site. See forum posting page for details. (up to 10 points each module based on quality)

Participation Activities

  • Complete the online course feedback form (5 points for completing)
  • Complete the online practice final exam (10 points for attempting)
  • Meet with the instructor once per week to discuss course progress and ask questions (up to 10 points each based on progress)

Unit Assessments

You are responsible for completing all of the online unit assessments listed below. Multiple modules are included in single exams. These exams fall into the online assessments category of your course grade.

  • Modules 1 - 4: Switching Concepts, VLANs, and InterVLAN Routing Exam
  • Modules 5 - 6: Redundant Networks Exam
  • Modules 7 - 9: Available and Reliable Networks Exam
  • Modules 10 - 13: L2 Security and WLANs Exam
  • Modules 14 - 16: Routing Concepts and Configuration Exam

Skills Final Exam

The Skills Final Exam is designed to test your ability to apply the concepts learned in this class and practiced in labs to common, real-world scenarios. There are two parts to this portion of your grade.

  • Half of your grade in this category will be based on successfully completing all parts of the online Packet Tracer Practice Skills Exam at home. You grade will be based on correctly completing all parts of the activity. You will be able to use outside resources for this part of the exam.
  • Half of your grade in this category will be based on completing a lab equipment skills exam. You will not be able to use any resources other than those specified by your instructor on this part of the exam.

Online Final Exam

You will need to complete an online final exam on the NetSpace site.

Return to ITC-2516 Homepage