Franske ITC-2300 Assignment: Difference between revisions

From ITCwiki
Jump to navigation Jump to search
Line 151: Line 151:
# Boot all your ESXi Server systems
# Boot all your ESXi Server systems
# Boot your VCSA VM Appliance using the ESXi web interface on the ESXi system hosting VCSA.
# Boot your VCSA VM Appliance using the ESXi web interface on the ESXi system hosting VCSA.
# Use the VCSA web interface to create a new VM which is running on an ESXi server OTHER than the one running VCSA (so more RAM is available) to install Windows Server 2016. You will need a VM with 2GB RAM and a 50GB hard drive.
# Use the VCSA web interface to create a new VM which is running on an ESXi server OTHER than the one running VCSA (so more RAM is available) to install Windows Server 2012. You will need a VM with 2GB RAM and a 50GB hard drive.
# Complete the installation of Windows Server 2012 into the new VM. The ISO installation file for Server 2012 can be found in "D:\CNT Files" Use "dc1" as the machine name.
# Complete the installation of Windows Server 2012 into the new VM. The ISO installation file for Server 2012 can be found in "D:\CNT Files" Use "dc1" as the machine name.
# Add the Active Directory Domain Services role to the server. Use "podX.local" (where X is your pod number) as the root domain name and "podX" as the NetBIOS domain name.
# Add the Active Directory Domain Services role to the server. Use "podX.local" (where X is your pod number) as the root domain name and "podX" as the NetBIOS domain name.

Revision as of 23:57, 19 October 2016

Labs

You are responsible for completing ALL of these labs. You must submit a lab report (click for details about how to write these) for each topic. Each lab report is worth up to 20 points. This falls into the Labs/Homework category of your course grade.

VoIP Labs

  • CUCM Install & Chapter 8 Lab (One report for these)
  • Chapter 9 Labs (One report for these)
    • NOTE: You will not need to complete the Active Directory (LDAP) Integration lab
  • Chapter 10 Labs (One report for these)

Virtualization Labs

IP Addressing Information

Use the following information to correctly address your VMware systems:

Default Gateway: 172.17.144.1 Subnet Mask: 255.255.255.0 DNS: 172.17.139.10

vmWare ESXi Installation Lab

  1. Create a new VM in VMware Workstation with the following specifications. Be sure to save the VM to a location on the D drive outside of the CNT Files folder.
    • 12GB RAM
    • 175GB Hard Drive
    • 2 CPUs
  2. Locate the ESXi Install ISO file (VMvisor Installer) in the D:\CNT Files\ITC 2300 directory and use it to start the installation
  3. Set the networking to "Bridged" and make sure you are connected to the ITC network and bridged to the correct adapter, not using automatic bridging.
  4. Set the root password on your ESXi system during the installation, it needs to be at least 7 characters. Be sure to write it down!
  5. Create another new VM in VMware Workstation with the following specifications. Be sure to save the VM to a location on the D drive outside of the CNT Files folder.
    • 1GB RAM
    • 25GB Hard Drive
    • 2 CPUs
  6. Locate the Windows 7 Enterprise ISO file in the D:\CNT Files directory and use it to start the installation
  7. Set the networking to "Bridged" and make sure you are connected to the ITC network and bridged to the correct adapter, not using automatic bridging.
  8. Set the Administrative password on your Windows 7 Client system during the installation, be sure to write it down!
  9. Browse to the ESXi system in a web browser on your Windows 7 Client system.
  10. Download and install the vSphere Client for Windows
  11. Open the vSphere Client for Windows and connect to your ESXi system as the root user.
  12. Add a new account and give it administrative permissions to the ESXi system. Log out of the root account and in with the new user account.
  13. Copy the Linux Mint 17.3 ISO file from the D:\CNT Files directory on your host system into your Windows 7 Client system
  14. Use vSphere Client to create a new folder on the ESXi datastore for ISO files.
  15. Upload the Linux Mint ISO file to the new ISO folder on the ESXi server datastore.
  16. Use the vSphere Client to create a new VM on the ESXi system (not in VMware Workstation) where you can install the Linux Mint system.
  17. Shut down your Windows 7 Client
  18. Use a web browser on your host system to access the ESXi server's web interface.
  19. Log in to the "VMware Host Client" through the web interface using your new login credentials (not the root account)
  20. Complete the installation of Linux Mint as a VM on the ESXi host using vSphere Host Client
  21. Safely shut down your ESXi server VM.
  22. Ensure all your network connections are back to normal and you are connected to the campus network.

vmWare vSphere vCenter Server Installation Lab

  1. Connect the PCs in your pod to the ITCnet network
  2. Boot your ESXi Server system
  3. Obtain static IP addressing information from the table above and change the IP address of each ESXi server in your pod to a unique static IP address.
  4. Boot your Windows 7 Client system
  5. Download and install the Virtual Clone Drive software in your Windows 7 Client system
  6. Mount the vSphere vCenter Installer ISO (VCSA) found in the D:\CNT Files location on your Windows 7 Client system using the Virtual Clone Drive software and install the VMware Client Integration Plugin (found in the vcsa folder of the CD image) on the Windows 7 Client.
  7. Open the vcsa-setup.htm file found in the root of the CD image and click install to begin the installation process. If you're unfamiliar with the installation process you can refer back to your readings as well as a VMware walk-through.
  8. During the installation you will need to select one of your pod's ESXi servers to install the vCenter appliance onto. Only one VCSA installation per pod!
  9. Set a root password for your VCSA server during the installation process, be sure to write this down!
  10. When given the option you should install vCenter Server with an Embedded Platform Services Controller
  11. When creating a new SSO domain use "podX.local" (where X is replaced by your pod number) as your SSO Domain Name
  12. When asked about the appliance size choose a "Tiny" installation.
  13. When asked about the database select the option to use an embedded database.
  14. Use the correct static IP address for the VCSA from the allocation you received for your pod and choose to synchronize time with the ESXi appliance host.
  15. After the installation completes use your credentials (administrator@podX.local) to log in to the VCSA web client at the address provided.
  16. Spend a few minutes exploring the VCSA web client interface
  17. Create a new Datacenter and give it a name
  18. Add the all the ESXi hosts in your pod to the datacenter
  19. Try connecting to your VCSA server from your vmWare Client software on your Windows 7 system instead of through the web client and see what similarities and differences you can find.
  20. Either using the web client or the desktop client create a few more VMs through VCSA on various different ESXi hosts. Use the ISOs in the CNT Files folder to install another copy of Mint into one, Windows 7 into another, and Windows XP into another.
  21. Safely shutdown all running VMs except VCSA
  22. Safely shutdown the VCSA appliance
  23. Safely shutdown all ESXi hosts
  24. Safely Shutdown Windows 7 Client System
  25. Ensure your system is reconnected to the campus network

vmWare vSphere Administration Lab

  1. Connect the PCs in your pod to the ITCnet network
  2. Boot all your ESXi Server systems
  3. Boot your VCSA VM Appliance using the ESXi web interface on the ESXi system hosting VCSA.
  4. Use the VCSA web interface to create a new VM which is running on an ESXi server OTHER than the one running VCSA (so more RAM is available) to install Windows Server 2012. You will need a VM with 2GB RAM and a 50GB hard drive.
  5. Complete the installation of Windows Server 2012 into the new VM. The ISO installation file for Server 2012 can be found in "D:\CNT Files" Use "dc1" as the machine name.
  6. Add the Active Directory Domain Services role to the server. Use "podX.local" (where X is your pod number) as the root domain name and "podX" as the NetBIOS domain name.
  7. While the Active Directory role is installed and the domain controller promotion script is running (these will take some time to complete) continue through this lab.
  8. It's sometimes the case that you may have a malfunctioning web interface and need to start some critical VMs such as VCSA and some Active Directory servers only through the host command line interface. We'll simulate this setup by checking the status and powering on one of our Windows 7 or Linux Mint VMs through this host console.
  9. Use the host command line console on your ESXi machines to get a list of the VMs registered at each host.
  10. Use the host command line console on your ESXi machines to check the power status of one of your Windows 7 or Mint VMs (they should be off)
  11. Verify the VMs are off in the vCenter Server web client
  12. Use the host command line console on your ESXi machines to power on one of your Windows 7 or Mint VMs.
  13. Verify the VM is powering on through both the Use the host command line console on your ESXi machine as well as through the vCenter web interface.
  14. Another useful virtual machine task is to set certain VMs to automatically power on when the ESXi server powers on. Read the VMware KB article on the topic.
  15. Set the VCSA VM to automatically power on with the ESXi host.
  16. One benefit of the vCenter Server system is that you can migrate VMs from one ESXi host to another. First let's try this with a powered off virtual machine.
  17. Choose one of the powered off VMs on one of your hosts in the VCSA Web Client. On the summary tab check to see which host the VM currently resides on.
  18. Right click on it and choose migrate to open the migration wizard. You want to move both the compute (CPU/RAM) and storage (disk images) to a new host so make that selection.
  19. Select a different ESXi server and a datastore attached to that server and begin the migration.
  20. Once the migration is complete check that the VM shows it is on a different host and verify that it still powers up and works.
  21. An even more powerful tool is to be able to migrate VMs while they are running, this feature is called vMotion. Take the same VM and try the migration process again (back to the original host) while the machine is powered on.
  22. This may take quite a bit longer to complete so let's go back to our Windows Server setup while the vMotion magic is happening.
  23. It would be nice to have a single sign on for VMware vCenter Server users which is backed by our Active Directory domain so let's see if we can get that running.
  24. Follow the VMware instructions for joining a vCenter Server Appliance to an AD domain.
  25. Follow the VMware instructions for adding a vCenter Server Single Sign-On identity source. You may also need to read the Active Directory Identity Source Settings.
  26. Create a new user account in AD and try adding it as an administrator in vCenter Server.
  27. Try logging in with the new account in vCenter Server.
  28. Safely shutdown all running VMs except VCSA
  29. Safely shutdown the VCSA appliance
  30. Safely shutdown all ESXi hosts
  31. Ensure your system is reconnected to the campus network

IoT or Storage Labs

  • TBD

Homework

Any homework assigned in the course will go here. This falls into the homework category of your course grade.

  • For each topic you need to write at least 5 high quality multiple choice questions and submit them in the correct format, with the correct answer and a citation (book name and page number, URL, or other resource). These questions will be worth up to 15 points for each topic based on grammar, quality, spread across the topic content (don't concentrate on just one part of the topic), etc. Be sure to read the Writing Moodle Questions tutorial for additional information.

Participation Activities

Any participation activities completed in the course will go here. This falls into the participation category of your course grade.

  • For each topic you need to meet with the instructor at least once to check on your status and understanding of the topic. Each meeting will be worth up to 10 points.

Topic Assessments

You are responsible for completing an online assessment for each topic. These fall into the online assessments category of your course grade.

Other

You are also responsible for completing these things, see the course syllabus for category and weighting information.

  • Online Final Exam
  • Course Project

Course Project

The course project will take the place of the skills exam in this course and will allow you to continue to experiment with one of the topic areas covered in the course. Additional details will be available later in the course.

Return to ITC-2300 Homepage