Cisco Shortcut Guide: Difference between revisions

From ITCwiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 347: Line 347:
Switch(config-if)#'''channel-group 1 mode desirable'''
Switch(config-if)#'''channel-group 1 mode desirable'''


|Switch(config)#'''interface range fastethernet 0/7 - 0/12'''
|Switch(config)#'''interface range f0/7-0/12'''


Switch(config-if)#'''switchport trunk encapsulation dot1q'''
Switch(config-if)#'''sw tru en do'''


Switch(config-if)#'''switchport mode trunk'''
Switch(config-if)#'''sw mo tru'''


Switch(config-if)#'''channel-group 1 mode desirable'''
Switch(config-if)#'''channel-g 1 mo de'''
|}
|}

Revision as of 20:16, 23 April 2012

Basic Tips

  • Use the up arrow to bring up your last entered commands and the down arrow to go back.
  • Type ? to see the list of possible commands and your current prompt
  • Use the home key on your keyboard to bring your cursor to the beginning of the command you're typing. You can use the end key to go back to the end.






Do you want to get out of a long list without having to scroll through everything? (For example show run)

  • Instead of hitting the space bar repeatedly just type the letter q

Are you in a config mode and wish to issue a show command?

  • Just put the word do in front of your command
    • Router(config)#do show run

Do the following to keep those pesky log messages from disrupting your typing:

  • Router(config)#line con 0
  • Router(config-line)#logg syn














  • Hit the tab key to automatically complete a command you are typing.
  • To quickly cancel a ping use Ctrl-Shift-6






The following examples will have full versions of common commands next to the shortest versions(These will not necessarily work on all versions of routers or switches).

Clear the Configurations

Switch>enable

Switch#erase startup-config

Switch#delete flash:vlan.dat (This step only needed for switches that have vlans added)

Switch#reload

Switch>en

Switch#era st

Switch#del vlan.dat

Switch#rel






Basic Configurations

Router#configuration terminal

Router(config)#enable secret cisco

Router(config)#banner motd #Authorized access only!#

Router(config)#line console 0

Router(config-line)#password class

Router(config-line)#login

Router(config-line)#no ip domain-lookup

Router(config)#hostname R1

R1(config)#copy running-config startup-config

Router#configuration terminal

Router(config)#enable secret cisco

Router(config)#banner motd #Authorized access only!#

Router(config)#line console 0

Router(config-line)#password class

Router(config-line)#login

Router(config-line)#no ip domain-lookup

Router(config)#hostname R1

R1(config)#copy run start














Assign Addresses

Router#configuration terminal

Router(config)#interface fastethernet 0/0

Router(config-if)#ip address 192.168.1.1 255.255.255.0

Router(config-if)#description Crossover cable to R2

Router(config-if)#no shutdown

Router(config-if)#interface serial 0/0/0

Router(config-if)#ip address 192.168.2.1 255.255.255.0

Router(config-if)#clock rate 64000

Router(config-if)#end

Router#show ip interfaces brief

Router#conf t

Router(config)#int f0/0

Router(config-if)#ip add 192.168.1.1 255.255.255.0

Router(config-if)#des Crossover cable to R2

Router(config-if)#no sh

Router(config-if)#int s0/0/0

Router(config-if)#ip add 192.168.2.1 255.255.255.0

Router(config-if)#clock r 64000

Router(config-if)#end

Router#sh ip int bri
















RIP

Router(config)#router rip

Router(config-router)#version 2

Router(config-router)#network 192.168.0.0

Router(config-router)#end

Router#show ip route

Router#show ip protocols

Router(config)#router rip

Router(config-router)#ver 2

Router(config-router)#net 192.168.0.0

Router(config-router)#end

Router#sh ip route

Router#sh ip proto










EIGRP

Router(config)#router eigrp 1

Router(config-router)#network 192.168.0.0

Router(config-router)#no auto-summary

Router(config-router)#redistribute static

Router(config-router)#ip route 0.0.0.0 0.0.0.0 s0/0/0

Router(config)#rout eigrp 1

Router(config-router)#net 192.168.0.0

Router(config-router)#no auto

Router(config-router)#red stat

Router(config-router)#ip rou 0.0.0.0 0.0.0.0 s0/0/0









Switchport Security

Swtich(config)#interface fastethernet 0/6

Swtich(config-if)#switchport mode access

Swtich(config-if)#switchport access vlan 10

Swtich(config-if)#switchport port-security

Swtich(config-if)#switchport port-security maximum 5

Swtich(config-if)#switchport port-security mac-address 1111.2222.3333

Swtich(config-if)#switchport port-security violation shutdown

Swtich(config-if)#do show port-security

Swtich(config)#interface fastethernet 0/6

Swtich(config-if)#switchport mode access

Swtich(config-if)#switchport access vlan 10

Swtich(config-if)#switchport port-security

Swtich(config-if)#switchport port-security maximum 5

Swtich(config-if)#switchport port-security mac-address 1111.2222.3333

Swtich(config-if)#switchport port-security violation shutdown

Swtich(config-if)#do show port-security













VTP

Switch(config)#vtp version 2

Switch(config)#vtp mode client

Switch(config)#vtp domain CISCO

Switch(config)#vtp password cisco

Switch(config)#vtp pruning

Switch(config)#do show vtp status

Switch(config)#vtp version 2

Switch(config)#vtp mode client

Switch(config)#vtp domain CISCO

Switch(config)#vtp password cisco

Switch(config)#vtp pruning

Switch(config)#do show vtp status










NAT/PAT

Router(config)#ip nat pool POOL 192.168.100.1 192.168.100.50 netmask 255.255.255.0

Router(config)#access-list 1 permit 172.168.0.0 0.0.0.255

Router(config)#ip nat inside source list 1 pool POOL overload

Router(config)#interface fastethernet 0/0

Router(config-if)#ip nat inside

Router(config-if)#interface fastethernet 0/0

Router(config-if)#ip nat outside

Router(config)#ip nat pool POOL 192.168.100.1 192.168.100.50 netmask 255.255.255.0

Router(config)#access-list 1 permit 172.168.0.0 0.0.0.255

Router(config)#ip nat inside source list 1 pool POOL overload

Router(config)#interface fastethernet 0/0

Router(config-if)#ip nat inside

Router(config-if)#interface fastethernet 0/0

Router(config-if)#ip nat outside












DHCP

R1(config)#ip dhcp excluded-address 10.0.0.1 10.0.0.5

R1(config)#ip dhcp pool POOL

R1(dhcp-config)#network 10.0.0.0 255.255.255.0

R1(dhcp-config)#default-router 10.0.0.1

R2(config)#interface fastethernet 0/5

R2(config-if)#ip helper-address 10.10.10.5

R1(config)#ip dhcp excluded-address 10.0.0.1 10.0.0.5

R1(config)#ip dhcp pool POOL

R1(dhcp-config)#network 10.0.0.0 255.255.255.0

R1(dhcp-config)#default-router 10.0.0.1

R2(config)#interface fastethernet 0/5

R2(config-if)#ip helper-address 10.10.10.5













Connecting Switches

Switch(config)#interface range fastethernet 0/7 - 0/12

Switch(config-if)#switchport trunk encapsulation dot1q

Switch(config-if)#switchport mode trunk

Switch(config-if)#channel-group 1 mode desirable

Switch(config)#interface range f0/7-0/12

Switch(config-if)#sw tru en do

Switch(config-if)#sw mo tru

Switch(config-if)#channel-g 1 mo de