Cisco Shortcut Guide: Difference between revisions

From ITCwiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 59: Line 59:




 
<br><br>


== Basic Configurations ==
== Basic Configurations ==
Line 96: Line 96:
|}
|}


<br><br><br><br><br><br><br><br><br><br><br><br><br>
<br><br><br><br><br><br><br><br><br><br><br><br>


== Assign Addresses ==
== Assign Addresses ==

Revision as of 19:21, 23 April 2012

Basic Tips

  • Use the up arrow to bring up your last entered commands and the down arrow to go back.
  • Type ? to see the list of possible commands and your current prompt
  • Use the home key on your keyboard to bring your cursor to the beginning of the command you're typing. You can use the end key to go back to the end.






Do you want to get out of a long list without having to scroll through everything? (For example show run)

  • Instead of hitting the space bar repeatedly just type the letter q

Are you in a config mode and wish to issue a show command?

  • Just put the word do in front of your command
    • Router(config)#do show run

Do the following to keep those pesky log messages from disrupting your typing:

  • Router(config)#line con 0
  • Router(config-line)#logg syn














  • Hit the tab key to automatically complete a command you are typing.
  • To quickly cancel a ping use Ctrl-Shift-6






The following examples will have full versions of common commands next to the shortest versions(These will not necessarily work on all versions of routers or switches).

Clear the Configurations

Switch>enable

Switch#erase startup-config

Switch#delete flash:vlan.dat (This step only needed for switches that have vlans added)

Switch#reload

Switch>en

Switch#era st

Switch#del vlan.dat

Switch#rel






Basic Configurations

Router#configuration terminal

Router(config)#enable secret cisco

Router(config)#banner motd #Authorized access only!#

Router(config)#line console 0

Router(config-line)#password class

Router(config-line)#login

Router(config-line)#no ip domain-lookup

Router(config)#hostname R1

Router#configuration terminal

Router(config)#enable secret cisco

Router(config)#banner motd #Authorized access only!#

Router(config)#line console 0

Router(config-line)#password class

Router(config-line)#login

Router(config-line)#no ip domain-lookup

Router(config)#hostname R1













Assign Addresses

Router#configuration terminal

Router(config)#interface fastethernet 0/0

Router(config-if)#ip address 192.168.1.1 255.255.255.0

Router(config-if)#no shutdown

Router(config-if)#interface serial 0/0/0

Router(config-if)#ip address 192.168.2.1 255.255.255.0

Router(config-if)#clock rate 64000

Router(config-if)#end

Router#show ip interfaces brief

Router#conf t

Router(config)#int f0/0

Router(config-if)#ip add 192.168.1.1 255.255.255.0

Router(config-if)#no sh

Router(config-if)#int s0/0/0

Router(config-if)#ip add 192.168.2.1 255.255.255.0

Router(config-if)#clock r 64000

Router(config-if)#end

Router#sh ip int bri














RIP

Router(config)#router rip

Router(config-router)#version 2

Router(config-router)#network 192.168.0.0

Router(config-router)#end

Router#show ip route

Router#show ip protocols

Router(config)#router rip

Router(config-router)#ver 2

Router(config-router)#net 192.168.0.0

Router(config-router)#end

Router#sh ip route

Router#sh ip proto










EIGRP

Router(config)#router eigrp 1

Router(config-router)#network 192.168.0.0

Router(config-router)#no auto-summary

Router(config-router)#redistribute static

Router(config-router)#ip route 0.0.0.0 0.0.0.0 s0/0/0

Router(config)#rout eigrp 1

Router(config-router)#net 192.168.0.0

Router(config-router)#no auto

Router(config-router)#red stat

Router(config-router)#ip rou 0.0.0.0 0.0.0.0 s0/0/0