Cisco Configuration Professional

From ITCwiki
Revision as of 18:26, 30 November 2011 by Ande7955 (talk | contribs) (→‎Step 2.)
Jump to navigation Jump to search

Configuring a Cisco Router for CCP

Step 1.

Connect to your router using Telnet, SSH, or through the console.

Enter global configuration mode using this command:

Router(config)#enable Router(config)#

Step 2.

If HTTP and HTTPS are enabled and configured to use nonstandard port numbers, you can skip this step and use the already configured port number.

Router(config)# ip http server Router(config)# ip http secure-server Router(config)# ip http authentication local

Step 3.

Create User with Privilege level 15

Router(config)# username <username> privilege 15 password 0 <password>

Step 4.

Configure SSH and Telnet for local login and privilege level 15

Router(config)# line vty 0 4 Router(config-line)# privilege level 15 Router(config-line)# login local Router(config-line)# transport input telnet Router(config-line)# transport input telnet ssh Router(config-line)# exit

Step 5.

Enable local logging for log monitoring function

Router(config)# logging buffered 51200 warning


Installing CCP

Step 1.