Cisco Configuration Professional: Difference between revisions

From ITCwiki
Jump to navigation Jump to search
No edit summary
Line 11: Line 11:
=== Step 2. ===
=== Step 2. ===


'''If HTTP and HTTPS are enabled and configured to use nonstandard port numbers, you can skip this
'''If HTTP and HTTPS are enabled and configured to use nonstandard port numbers, you can skip this step and use the already configured port number.'''
step and use the already configured port number.'''


Router(config)# ip http server
Router(config)# ip http server

Revision as of 18:27, 30 November 2011

Configuring a Cisco Router for CCP

Step 1.

Connect to your router using Telnet, SSH, or through the console.

Enter global configuration mode using this command:

Router(config)#enable Router(config)#

Step 2.

If HTTP and HTTPS are enabled and configured to use nonstandard port numbers, you can skip this step and use the already configured port number.

Router(config)# ip http server Router(config)# ip http secure-server Router(config)# ip http authentication local

Step 3.

Create User with Privilege level 15

Router(config)# username <username> privilege 15 password 0 <password>

Step 4.

Configure SSH and Telnet for local login and privilege level 15

Router(config)# line vty 0 4 Router(config-line)# privilege level 15 Router(config-line)# login local Router(config-line)# transport input telnet Router(config-line)# transport input telnet ssh Router(config-line)# exit

Step 5.

Enable local logging for log monitoring function

Router(config)# logging buffered 51200 warning


Installing CCP

Step 1.