Cisco Back-to-Back T1 Interface Configuration: Difference between revisions

From ITCwiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
=Background Information=
{| {{table}}
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Step'''
| align="center" style="background:#f0f0f0;"|'''Step'''
Line 18: Line 19:
|}
|}
You should now have a Serial0/0/0:0 interface and/or Serial0/0/1:0 interface which you can assign an IP address to and use as with any normal serial interface, make sure to include the :0 on the end of the interface though.
You should now have a Serial0/0/0:0 interface and/or Serial0/0/1:0 interface which you can assign an IP address to and use as with any normal serial interface, make sure to include the :0 on the end of the interface though.
=Sample Two Card Configuration=
DCE IS S/0/0/0 AND DTE IS S0/0/1
card type t1 0 0
controller t1 0/0/0
clock source internal
chan 0 time 1-24
framing esf
linecode b8zs
controller t1 0/0/1
clock source line
chan 0 time 1-24
framing esf
linecode b8zs
DTE IS S0/0/0 AND DCE IS S0/0/1
card type t1 0 0
controller t1 0/0/0
clock source line
chan 0 time 1-24
framing esf
linecode b8zs
controller t1 0/0/1
clock source internal
chan 0 time 1-24
framing esf
linecode b8zs

Revision as of 20:51, 6 March 2015

Background Information

Step Instruction Command Example
1 Set the card to T1 mode card type t1 slot subslot card type t1 0 0
2a Set the clock source to internal (on each DCE port) controller t1 slot/subslot/port
clock source internal
controller t1 0/0/0
clock source internal
2b Set the clock source to line (on each DTE port) controller t1 slot/subslot/port
clock source line
controller t1 0/0/1
clock source line
3 Set the channel group 0 to include all 24 T1 timeslots controller t1 slot/subslot/port
channel-group 0 timeslots 1-24
controller t1 0/0/0
channel-group 0 timeslots 1-24
4 Set the port framing to esf controller t1 slot/subslot/port
framing esf
controller t1 0/0/0
framing esf
5 Set the linecode to b8zs controller t1 slot/subslot/port
linecode b8zs
controller t1 0/0/0
linecode b8zs

You should now have a Serial0/0/0:0 interface and/or Serial0/0/1:0 interface which you can assign an IP address to and use as with any normal serial interface, make sure to include the :0 on the end of the interface though.

Sample Two Card Configuration

DCE IS S/0/0/0 AND DTE IS S0/0/1

card type t1 0 0
controller t1 0/0/0
clock source internal
chan 0 time 1-24
framing esf
linecode b8zs
controller t1 0/0/1
clock source line
chan 0 time 1-24
framing esf
linecode b8zs

DTE IS S0/0/0 AND DCE IS S0/0/1

card type t1 0 0
controller t1 0/0/0
clock source line
chan 0 time 1-24
framing esf
linecode b8zs
controller t1 0/0/1
clock source internal
chan 0 time 1-24
framing esf
linecode b8zs