Chapter 5 Study Guide
This is where I am going to put the chapter 5 study guide. Don't read this until it is done and this sentance is not here! ~JB
Main Point
Bolded word to define
Blah blah
/Dev directoy
The /dev directory contains the special device files that control access all the devices. Two main types of devices under all systems:
Character devices
Data transfers character by character to and from the device.
Block devices
Transfers chunks or blocks of information at a time by using physical memory to buffer the transfer
To view the type of the file use the following command
“ls -l/dev/dsk”
Major and minor numbers are associated with the device special files in the /dev directory and are used by the operating system to determine the actual driver and device to be accessed by the user-level request for the special device file.
The major number identifies the device class or group, such as a controller for several terminals. The major number is assigned, sequentially, to each device driver by the Installable Driver Tools during driver installation.
The minor number identifies a specific device, such as a single terminal. Minor numbers are assigned to special files by the driver writer in another system configuration file called the Node file.
Filesystems
Filesystem: The organization imposed on a physical storage medium that is used to manage the storage, store, retrieve, and update data on device. All filesystems have three common components: the superblock, the inode table, and the data blocks. Together they organize files and allow rapid access to and retrieval of data.
Mounting
Mounting the process used to associate a device with a directory in the logical directory tree such that users can store data on that devices.
A mount point is a physical location or a directory in the partition used as a root filesystem.
Floppies
Used to transfer small amounts of information from computer to computer in the past Not available on all systems today Each disk must be formatted with a filesystem prior to being used to store files After formatting then you must mount it on the directory tree before it can be used
Use the mkfs (make file system) command to format the floppy disk
Specify the filesystem type with a –t switch
Specify a different file system name after the –t option such as the DOS FAT filesystem:
mkfs –t msdos /dev/fd0
If you don’t specify the filesystem then the default assumed is the ext2 file system: mkfs /dev/fd0