CCNA 2 v7 Lab 4.4.9 Starting Configurations: Difference between revisions
BenFranske (talk | contribs) (Created page with "Preconfiguration scripts for all the devices are documented below. Cut and paste or otherwise use these to pre-configure the equipment before beginning the lab. =Router R1= en...") |
BenFranske (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
Preconfiguration scripts for all the devices are documented below. Cut and paste or otherwise use these to pre-configure the equipment before beginning the lab. | Preconfiguration scripts for all the devices are documented below. Cut and paste or otherwise use these to pre-configure the equipment before beginning the lab. | ||
=Router R1= | =Router R1= | ||
<code> | |||
enable | enable | ||
configure terminal | configure terminal | ||
| Line 30: | Line 31: | ||
ip address 10.13.0.1 255.255.255.0 | ip address 10.13.0.1 255.255.255.0 | ||
end | end | ||
</code> | |||
=Switch S1= | =Switch S1= | ||
<code> | |||
enable | enable | ||
config terminal | config terminal | ||
| Line 83: | Line 86: | ||
no shut | no shut | ||
end | end | ||
</code> | |||
=Switch S2= | =Switch S2= | ||
<code> | |||
enable | enable | ||
config terminal | config terminal | ||
| Line 125: | Line 130: | ||
ip default-gateway 10.3.0.1 | ip default-gateway 10.3.0.1 | ||
end | end | ||
</code> | |||
Revision as of 21:26, 22 January 2020
Preconfiguration scripts for all the devices are documented below. Cut and paste or otherwise use these to pre-configure the equipment before beginning the lab.
Router R1
enable
configure terminal
hostname R1
no ip domain lookup
enable secret class
line con 0
password cisco
login
logging synch
line vty 0 4
password cisco
login
service password-encryption
banner motd $ Authorized Users Only! $
interface g0/0/1
no shut
interface g0/0/1.3
encap dot1q 3
ip add 10.3.0.1 255.255.255.0
interface g0/0/1.4
encap dot1q 4 native
ip address 10.4.0.1 255.255.255.0
interface g0/0/1.8
! encap dot1q 8 native
encap dot1q 8
interface g0/0/1.13
encap dot1q 13
ip address 10.13.0.1 255.255.255.0
end
Switch S1
enable
config terminal
hostname S1
no ip domain-lookup
enable secret class
line con 0
password cisco
login
logging synch
line vty 0 15
password cisco
login
service password-encryption
banner motd $ Authorized Users Only! $
vlan 3
name Management
vlan 4
name Operations
vlan 7
name ParkingLot
vlan 8
name Native
!vlan 13
! name Maintenance
interface vlan 3
ip address 10.3.0.11 255.255.255.0
no shut
exit
ip default-gateway 10.3.0.1
interface range f0/2-4, f0/7-24, G0/1-2
switchport mode access
switchport access vlan 7
shutdown
interface f0/1
switchport mode trunk
! switchport trunk native vlan 8
! switchport trunk allowed vlan add 3
switchport trunk allowed vlan 4,8,13
no shutdown
interface f0/6
switchport mode access
switchport access vlan 4
no shutdown
interface f0/5
switchport mode access
! default interface fa0/5
! switchport mode trunk
switchport trunk native vlan 8
! switchport trunk allowed vlan 3,4,8,13
switchport access vlan 3
no shut
end
Switch S2
enable
config terminal
hostname S2
no ip domain-lookup
enable secret class
line con 0
password cisco
login
logging synch
line vty 0 15
password cisco
login
service password-encryption
banner motd $ Authorized Users Only! $
vlan 3
name Management
vlan 4
name Operations
vlan 7
name ParkingLot
vlan 8
name Native
vlan 13
name Maintenance
interface vlan 3
ip address 10.3.0.12 255.255.255.0
no shut
interface range f0/2-17, f0/19-24, G0/1-2
switchport mode access
switchport access vlan 7
shutdown
interface f0/18
switchport mode access
switchport access vlan 13
interface f0/1
switchport mode trunk
switchport trunk native vlan 8
switchport trunk allowed vlan 4,8
! switchport trunk allowed vlan add 3,13
ip default-gateway 10.3.0.1
end