HP-3Com Switches: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
[[File: http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02581575/c02581575.pdf | ===Overview=== | ||
The ITC Department uses model HP-3Com 2928-SFP Plus. These switches are also known by model name HP v1910. | |||
The link to the User Guide is provided here as a file link. | |||
Manual for HP-3Com Baseline Smart Switch GbE Series [[File: http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02581575/c02581575.pdf]] | |||
===Enable Command Line Mode=== | |||
By default these switches are only configurable through the web interface and a very basic CLI mode. A full featured CLI mode can be enabled by connecting to the switch via Telnet or console cable and, after logging on, entering '''_cmdline-mode on'''. Confirm that all commands will be displayed and executed. You will be put in user-view mode and can enter system-view mode by typing '''system-view'''. Using the '''?''' mark you can learn about the commands available in either mode. | |||
Latest revision as of 05:39, 3 February 2013
Overview
The ITC Department uses model HP-3Com 2928-SFP Plus. These switches are also known by model name HP v1910.
The link to the User Guide is provided here as a file link.
Manual for HP-3Com Baseline Smart Switch GbE Series File:Http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02581575/c02581575.pdf
Enable Command Line Mode
By default these switches are only configurable through the web interface and a very basic CLI mode. A full featured CLI mode can be enabled by connecting to the switch via Telnet or console cable and, after logging on, entering _cmdline-mode on. Confirm that all commands will be displayed and executed. You will be put in user-view mode and can enter system-view mode by typing system-view. Using the ? mark you can learn about the commands available in either mode.