User:Hess0060

Printer Administration

Common UNIX Printing System (CUPS) is a printing system used by Linux computers. Information that will be sent to a printer is called a print job. The lp command is used to specify and print the print job. To check the status of a printer(s) the lpstat command is used. The cups daemon (cupsd) will assign all print jobs a unique print job ID and put them in the print queue. The print queue is a special temporary directory where the print jobs are stored before being sent to the printer. The path of the queue is usually /var/spool/cups on most Linux systems. If the printer is accepting print jobs, the cupsd will put the print job in to the queue. This is called spooling or queuing. Adding the –t option shows all the printers and there statuses on the system. kevin@kubuntu1:~$ lpstat -t scheduler is running system default destination: Samsung-ML-2152W device for Samsung-ML-2152W: smb:///192.168.0.195 Samsung-ML-2152W accepting requests since Tue 17 Jan 2012 11:25:40 PM CST printer Samsung-ML-2152W is idle. enabled since Tue 17 Jan 2012 11:25:40 PM CST kevin@kubuntu1:~$ To manipulate the status of a printer by using the cupsaccept, cupsreject, cupsenable, or cupsdisable commands. kevin@kubuntu1:~$ cupsaccept Samsung-ML-2152W kevin@kubuntu1:~$ cupsdisable Samsung-ML-2152W kevin@kubuntu1:~$ lpstat -t scheduler is running system default destination: Samsung-ML-2152W device for Samsung-ML-2152W: smb:///192.168.0.195 Samsung-ML-2152W accepting requests since Fri 23 Mar 2012 11:35:18 AM CDT printer Samsung-ML-2152W disabled since Fri 23 Mar 2012 11:35:18 AM CDT - Paused kevin@kubuntu1:~$ The –r option is used to give a reason why the printer’s status is set as such. kevin@kubuntu1:~$ cupsdisable Samsung-ML-2152W -r "OMG the printer is on fire" Samsung-ML-2152W kevin@kubuntu1:~$ lpstat -t scheduler is running system default destination: Samsung-ML-2152W device for Samsung-ML-2152W: smb:///192.168.0.195 Samsung-ML-2152W accepting requests since Fri 23 Mar 2012 11:35:18 AM CDT printer Samsung-ML-2152W disabled since Fri 23 Mar 2012 11:35:18 AM CDT - OMG the printer is on fire kevin@kubuntu1:/$ Use the lp command to print. kevin@kubuntu1:/$ lp -d Samsung-ML-2152W /home/kevin/Documents/reports request id is Samsung-ML-2152W-2 (1 file(s)) kevin@kubuntu1:/$ Other options can be added to the lp command as shown. Option Description −d printername Specifies the name of the printer to send the print job to −i print job ID Specifies a certain print job ID to modify −n number Prints a certain number of copies, where number can be any

          number

−m Mails you confirmation of print job completion −o option Specifies certain printing options. Common printing

          options include the following:
         cpi=number—Specifies the number of characters per inch,
          where number is the number of characters
         landscape—Prints in landscape orientation
          number-up=number—Prints the number of pages on a single
           page, where number is 1, 2, or 4
          sides=string—Sets double-sided printing, where string is
           either ”two-sided-short-edge” or ”two-sided-long-edge”

To print a list of all users logged in, pipe the who command to the lp command. kevin@kubuntu1:/$ who | lp -d Samsung-ML-2152W request id is Samsung-ML-2152W-4 (0 file(s)) kevin@kubuntu1:/$ To remove all print jobs from a specific user, add the –u <username> before the cancel command. To remove all print jobs use the –a as shown. kevin@kubuntu1:/$ cancel -a kevin@kubuntu1:/$ lpstat kevin@kubuntu1:/$ The Line Printer Daemon (LPD) is an alternative to CUPS, that is used by older Linux systems. The LPD commands can be used in CUPS. LPR command = print documents LPC command = view printer status LPQ command = see jobs in the queue LPRM command = remove job form queue You can find the cupsd configuration file in the /etc/cups/cupsd.conf directory. The /etc/cups/printers.conf contains settings about the specific printer. The command system-config-printer will launch a GUI-based program; the Printer Configuration tool. This program lets you add printers with Plug and Play (PnP) or specify the Uniform Resource Identifier (URI). Hewlett-Packard JetDirect, Internet Printing Protocol (IPP), Line Printer Daemon (LPD or Windows (SAMBA) allows you to print to a printer across the network. From the Printer Configuration tool you are also able to give users and groups permission to print to specific printers. You can use CUPS to administer and remotely administer printes through a web browser. To open the CUPS web-based control panel, navigate to http://servername:631.

Log File Administration

• For identifying and troubleshooting problems on a Linux System
• Called log files most Daemons record information and error messages to files stored on the file system.
• Typically stored in the /var/log directory

• Example:

• /var/log/samba contains log files created by the samba file-sharing daemons

Common Linux log files found in /var/log

• boot.log

Contains basic information regarding daemon startup obtained during system initialization

• cron

Contains information and error messages generated by the cron and at daemons

• dmesg

Contains detected hardware information obtained during system startup

• maillog

Contains information and error messages generated by the sendmail daemon

• secure

Contains information and error messages regarding network access generated by daemons such as sshd and xinetd

• wtmp

Contains a history of all login sessions

• rpmpkgs yum.log

Contains a list of packages installed by the Red Hat Package Manager and related error messages

• xferlog

Contains information and error messages generated by the FTP daemon

• Xorg.0.log XFree86

Contains information and error messages generated by X Windows

• lastlog

Contains a list of users and their last login time; must be viewed using the lastlog command

• messages

Contains detailed information regarding daemon startup obtained at system initialization as well as important system messages produced after system initialization

System Log Daemon

• logging of most events is handled centrally in Linux in the System Log Deamon
• When the daemon is started on the system

• Creates a socket /dev/log

• This is for other system processes to write to
• It then reads any information written to this socket and saves it to the appropriate log file according to /etc/rsyslog.conf

• To view use cat /etc/rsyslog.conf

• Sample output showing the Facility, Priority and Location of the /etc/rsyslog.conf file

• news.=crit /var/log/news/news.crit

• Facility: "news."

• The area of the system to listen to and log

• Priority: "=crit"

• The importance of the information being logged

• Location: /var/log/news/news.crit

• The location and path of the log file

Examples of kernel log facilities with differing priorities

• kern.warning /var/log/logfile

• logs warning messages and those with more serious priorities to the /var/log/logfile

• kern.=warning /var/log/logfile

• logs just the warning messages to the /var/log/logfile

• kern.* /var/log/logfile

• logs all error messages to the /var/log/logfile

• kern.*;kern. !=warn /var/log/logfile

• logs all but the warning priority messages to /var/log/logfile

• \*.=warn;kern.none /var/log/logfile

• logs all warnings from all facilities except the kernel to the /var/log/logfile

Facilities used by the System Daemon Log

• auth or security

• Specifies messages from the login system, such as the login program, the getty program, and the su command

• authpriv

• Specifies messages from the login system when authenticating users across the network or to system databases

• cron

• Specifies messages from the cron and at daemons

• daemon

• Specifies messages from system daemons, such as the FTP daemon

• kern

• Specifies messages from the Linux kernel

• lpr

• Specifies messages from the printing system (lpd)

• mail

• Specifies messages from the e-mail system (sendmail)

• mark

• Specifies time stamps used by syslogd; used internally only

• news

• Specifies messages from the Inter Network News daemon and other USENET daemons

• syslog

• Specifies messages from the syslog daemon

• user

• Specifies messages from user processes

• uucp

• Specifies messages from the uucp (UNIX to UNIX copy) daemon

• local0-7

• Specifies local messages; these are not used by default but can be defined for custom use

Priorities used by the System Daemon Log (listed in ascending order)

• debug

• Indicates all information from a certain facility

• info

• Indicates normal information messages as a result of system operations

• notice

• Indicates information that should be noted for future reference, yet does not indicate a problem

• warning or warn

• Indicates messages that might be the result of an error but are not critical to system operations

• error or err

• Indicates all other error messages not described by other priorities

• crit

• Indicates system critical errors such as hard disk failure

• alert

• Indicates an error that should be rectified immediately, such as a corrupt system database

• emerg or panic

• Indicates very serious system conditions that would normally be broadcast to all users

The etc/rsyslog.conf file can also send logging information to another computer.

• Facility.priority @hostname:portnumber

• The remote computer

• Must have modules that listen to TCP or UDP protocol uncommented in the /etc/rsyslog.conf

• Commented

• 1. Provides UDP syslog reception
  2. $ModLoad imudp.so
  3. $UDPServerRun 514
  4. Provides TCP syslog reception
  5. $ModLoad imtcp.so
  6. $InputTCPServerRun 514

• Un-Commented

• 1. Provides UDP syslog reception
• $ModLoad imudp.so
• $UDPServerRun 514
  1. Provides TCP syslog reception
• $ModLoad imtcp.so
• $InputTCPServerRun 514

• This allows the system to accept incoming requests from another System Log Daemon on TCP and UDP port 514 (the default System Log Daemon port)

Managing Log Files

Log files can contain a lot of important system information so it's a good idea to clear the contents of the log files from time to time.

DO NOT remove the log files, the permissions and ownership will be removed as well!!!

We're just going to clear out the contents of the log file.

To do so the > redirect symbol can be used.

This function can be scheduled as well using the logrotate command to backup and clear logfiles stored in /etc/logrotate.conf file and files stored in /etc/logrotate.d directory

• • The log rotate command renames (rotates) log files on a cyclic basis

• • test.log becomes test.log.YYYYMMDD

• • A new test.log file is created to accept system log info.

• Can be set to keep a certain number of log files

• If configured to keep 2 log files, logrotate will only keep 2 copies. Then when it cycles logrotate will automatically remove the oldest copy.

• Most rotation information within /etc/logrotate.conf is overridden from files stored in the /etc/logrotate.d directory.

On most Linux systems, the logrotate utility is automatically scheduled to run daily via the file /etc/cron.daily/logrotate, however it can be run manually by typing logrotate /etc/logrotate.conf at a command prompt

Over time the logrotate command generates several copies of each logfile /var/log to view this we type Ls /var/log

Administering Users and Groups

• Bash shell prompts for user accounts information this is called authentication.

8User accounts and passwords are located in the /etc/password and /etc/shadow and are encrypted

• /etc/password and a line that contains the encrypted password and

• /etc/shadow. expiration information in

• You can use the dfdffpwunconv command to revert to using an /etc/passwd file only, This is not best

practice for security

• You can use the pwconv command to configure the system again using an /etc/shadow file for

password storage.

• This is the format used in /etc/password file “name:password:UID:GID:GECOS:home directory:shell”

• examples: root:x:0:0:root:/root:/bin/bash

• 8bin:x:1:1:bin:/bin:/sbin/nologin

• daemon:x:2:2:daemon:/sbin:/sbin/nologin

• 8UID & /etc/passwd

• The User Identifier (UID) specifies the unique User ID that is assigned to each user.

• The root user always has a UID of zero.

• UIDs that are less than 500 refer to user accounts that are used by daemons when logging in to

the system.

• The root user is usually listed at the top of the /etc/passwd file

• In the /etc/passwd file passwords are replaced with the letter “X” password are actually stored

in the shadow file and are encrypted.

• password times are expressed in days.

• You can change the password expiration time in the shadow file. In the shadow file min = time

before user can change password again. max = time that user can use current password.

• warn= the number of days before a user is prompted to change their password

• by default min =0 max=99,999 days and warn= 7days

Groups

• The Group Identifier (GID) is the primary Group ID for the

user.

• primary group ID’s designate file/directory ownership

• Each user can be a member of several groups, but only one

of those groups can be the primary group.

• primary groups are listed in the password file.

• All groups and their members are listed in the /etc/group

Creating User Accounts

• useradd command is used to create commands

• Example: useradd bobg
• There is two files that are used to create default account information.
• (UID,shell and home directories)

• The first is /etc/login.defs and sets default locations for email password

expiration minimum password length and the rage of UID and GIDs for

the users.

• The second is /etc/default/useradd file. It controls default primary

groups, locations of home directories, number of days to disable

accounts with expired passwords, date to disable user accounts, and the

skeleton directory.

• A skeleton directory contains files that are copied to new users home

directories when a new user is created.

Creating User Accounts

Typical contents of the default/useradd file

useradd defaults file

GROUP=100

HOME=/home

INACTIVE=-1

EXPIRE=

SHELL=/bin/bash

SKEL=/etc/skel

CREATE_MAIL_SPOOL=yes

[root@server1 ~]# _

• You can alter some of the user creation parameter using the options below.

Options	Function
-e	Specifies a date to disable the account from logging in.
-d	Sets absolute pathname to the users directory.
-c	Adds conscription entry to the GECOS of the /etc/passwd file.
-f	Sets number of days until a users password is disabled.
-k	Specifies the skeleton directory.
-G	Specifies all other group memberships for the user account.
-m	specifies that a home directory should be created for the user.
-g	Specifies the primary group for the user account. by default a group is created with the same name as the user and made the primary group for that user
-s	sets path to the shell used for accounts.
-u	sets the UID of a account.