Cisco Back-to-Back T1 Interface Configuration: Difference between revisions
Jump to navigation
Jump to search
BenFranske (talk | contribs) No edit summary |
BenFranske (talk | contribs) No edit summary |
||
| Line 11: | Line 11: | ||
| 2b||Set the clock source to line (on each DTE port)||controller t1 ''slot/subslot/port''<br> clock source line||controller t1 0/0/1<br> clock source line | | 2b||Set the clock source to line (on each DTE port)||controller t1 ''slot/subslot/port''<br> clock source line||controller t1 0/0/1<br> clock source line | ||
|- | |- | ||
| 3||Set the channel group to include all 24 T1 timeslots||controller t1 ''slot/subslot/port''<br> channel-group | | 3||Set the channel group 0 to include all 24 T1 timeslots||controller t1 ''slot/subslot/port''<br> channel-group 0 timeslots 1-24||controller t1 0/0/0<br> channel-group 0 timeslots 1-24 | ||
|} | |} | ||
Revision as of 01:53, 26 August 2014
| Step | Instruction | Command | Example |
| 1 | Set the card to T1 mode | card type t1 slot subslot | card type t1 0 0 |
| 2a | Set the clock source to internal (on each DCE port) | controller t1 slot/subslot/port clock source internal |
controller t1 0/0/0 clock source internal |
| 2b | Set the clock source to line (on each DTE port) | controller t1 slot/subslot/port clock source line |
controller t1 0/0/1 clock source line |
| 3 | Set the channel group 0 to include all 24 T1 timeslots | controller t1 slot/subslot/port channel-group 0 timeslots 1-24 |
controller t1 0/0/0 channel-group 0 timeslots 1-24 |