Cisco Configuration Professional: Difference between revisions
No edit summary |
|||
| Line 2: | Line 2: | ||
=== Step 1. === | === Step 1. === | ||
Connect to your router using Telnet, SSH, or through the console. | '''Connect to your router using Telnet, SSH, or through the console.''' | ||
Enter global configuration mode using this command: | Enter global configuration mode using this command: | ||
| Line 11: | Line 11: | ||
=== Step 2. === | === Step 2. === | ||
If HTTP and HTTPS are enabled and configured to use nonstandard port numbers, you can skip this | '''If HTTP and HTTPS are enabled and configured to use nonstandard port numbers, you can skip this | ||
step and use the already configured port number. | step and use the already configured port number.''' | ||
Router(config)# ip http server | Router(config)# ip http server | ||
| Line 19: | Line 19: | ||
=== Step 3. === | === Step 3. === | ||
Create User with Privilege level 15 | '''Create User with Privilege level 15''' | ||
Router(config)# username <username> privilege 15 password 0 <password> | Router(config)# username <username> privilege 15 password 0 <password> | ||
=== Step 4. === | === Step 4. === | ||
Configure SSH and Telnet for local login and privilege level 15 | '''Configure SSH and Telnet for local login and privilege level 15''' | ||
Router(config)# line vty 0 4 | Router(config)# line vty 0 4 | ||
| Line 34: | Line 34: | ||
=== Step 5. === | === Step 5. === | ||
Enable local logging for log monitoring function | '''Enable local logging for log monitoring function''' | ||
Router(config)# logging buffered 51200 warning | Router(config)# logging buffered 51200 warning | ||
Revision as of 18:26, 30 November 2011
Configuring a Cisco Router for CCP
Step 1.
Connect to your router using Telnet, SSH, or through the console.
Enter global configuration mode using this command:
Router(config)#enable Router(config)#
Step 2.
If HTTP and HTTPS are enabled and configured to use nonstandard port numbers, you can skip this step and use the already configured port number.
Router(config)# ip http server Router(config)# ip http secure-server Router(config)# ip http authentication local
Step 3.
Create User with Privilege level 15
Router(config)# username <username> privilege 15 password 0 <password>
Step 4.
Configure SSH and Telnet for local login and privilege level 15
Router(config)# line vty 0 4 Router(config-line)# privilege level 15 Router(config-line)# login local Router(config-line)# transport input telnet Router(config-line)# transport input telnet ssh Router(config-line)# exit
Step 5.
Enable local logging for log monitoring function
Router(config)# logging buffered 51200 warning