Recover Cisco Catalyst 2960 Switch Password: Difference between revisions
Jump to navigation
Jump to search
Jasonredlin (talk | contribs) No edit summary |
Jasonredlin (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
== Recover Cisco Catalyst 2960 Switch Password == | == Recover Cisco Catalyst 2960 Switch Password == | ||
1. | 1. Connect to the console port of the switch a PC with terminal emulating software like Hyperterminal or TeraTerm. The terminal settings are as follows: | ||
◦Bits per second (baud): 9600 | ◦Bits per second (baud): 9600 | ||
◦Data bits: 8 | ◦Data bits: 8 | ||
◦Parity: None | ◦Parity: None | ||
◦Stop bits: 1 | ◦Stop bits: 1 | ||
◦Flow Control: Xon/Xoff | ◦Flow Control: Xon/Xoff | ||
Revision as of 15:11, 9 December 2010
Recover Cisco Catalyst 2960 Switch Password
1. Connect to the console port of the switch a PC with terminal emulating software like Hyperterminal or TeraTerm. The terminal settings are as follows:
◦Bits per second (baud): 9600 ◦Data bits: 8 ◦Parity: None ◦Stop bits: 1 ◦Flow Control: Xon/Xoff