Recover Cisco Catalyst 2960 Switch Password: Difference between revisions
Jump to navigation
Jump to search
Jasonredlin (talk | contribs) No edit summary |
Jasonredlin (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
== Recover Cisco Catalyst 2960 Switch Password == | == Recover Cisco Catalyst 2960 Switch Password == | ||
1. COnnect to the console port of the switch a PC with terminal emulating software like Hyperterminal or TeraTerm. The terminal settings are as follows: | |||
◦Bits per second (baud): 9600 | |||
◦Data bits: 8 | |||
◦Parity: None | |||
◦Stop bits: 1 | |||
◦Flow Control: Xon/Xoff | |||
*[[Password Recovery and Device Reset Procedures]] | |||
Revision as of 15:11, 9 December 2010
Recover Cisco Catalyst 2960 Switch Password
1. COnnect to the console port of the switch a PC with terminal emulating software like Hyperterminal or TeraTerm. The terminal settings are as follows:
◦Bits per second (baud): 9600
◦Data bits: 8
◦Parity: None
◦Stop bits: 1
◦Flow Control: Xon/Xoff