CCNA 2 v7 Lab 4.4.9 Starting Configurations: Difference between revisions
Jump to navigation
Jump to search
BenFranske (talk | contribs) No edit summary |
BenFranske (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
Preconfiguration scripts for all the devices are documented below. Cut and paste or otherwise use these to pre-configure the equipment before beginning the lab. | Preconfiguration scripts for all the devices are documented below. Cut and paste or otherwise use these to pre-configure the equipment before beginning the lab. | ||
=Router R1= | =Router R1= | ||
< | <nowiki> | ||
enable | enable | ||
configure terminal | configure terminal | ||
| Line 30: | Line 30: | ||
encap dot1q 13 | encap dot1q 13 | ||
ip address 10.13.0.1 255.255.255.0 | ip address 10.13.0.1 255.255.255.0 | ||
end | end</nowiki> | ||
</ | |||
=Switch S1= | =Switch S1= | ||
< | <nowiki> | ||
enable | enable | ||
config terminal | config terminal | ||
| Line 85: | Line 84: | ||
switchport access vlan 3 | switchport access vlan 3 | ||
no shut | no shut | ||
end | end</nowiki> | ||
</ | |||
=Switch S2= | =Switch S2= | ||
< | <nowiki> | ||
enable | enable | ||
config terminal | config terminal | ||
| Line 129: | Line 127: | ||
! switchport trunk allowed vlan add 3,13 | ! switchport trunk allowed vlan add 3,13 | ||
ip default-gateway 10.3.0.1 | ip default-gateway 10.3.0.1 | ||
end | end</nowiki> | ||
</ | |||
Latest revision as of 21:29, 22 January 2020
Preconfiguration scripts for all the devices are documented below. Cut and paste or otherwise use these to pre-configure the equipment before beginning the lab.
Router R1
enable configure terminal hostname R1 no ip domain lookup enable secret class line con 0 password cisco login logging synch line vty 0 4 password cisco login service password-encryption banner motd $ Authorized Users Only! $ interface g0/0/1 no shut interface g0/0/1.3 encap dot1q 3 ip add 10.3.0.1 255.255.255.0 interface g0/0/1.4 encap dot1q 4 native ip address 10.4.0.1 255.255.255.0 interface g0/0/1.8 ! encap dot1q 8 native encap dot1q 8 interface g0/0/1.13 encap dot1q 13 ip address 10.13.0.1 255.255.255.0 end
Switch S1
enable config terminal hostname S1 no ip domain-lookup enable secret class line con 0 password cisco login logging synch line vty 0 15 password cisco login service password-encryption banner motd $ Authorized Users Only! $ vlan 3 name Management vlan 4 name Operations vlan 7 name ParkingLot vlan 8 name Native !vlan 13 ! name Maintenance interface vlan 3 ip address 10.3.0.11 255.255.255.0 no shut exit ip default-gateway 10.3.0.1 interface range f0/2-4, f0/7-24, G0/1-2 switchport mode access switchport access vlan 7 shutdown interface f0/1 switchport mode trunk ! switchport trunk native vlan 8 ! switchport trunk allowed vlan add 3 switchport trunk allowed vlan 4,8,13 no shutdown interface f0/6 switchport mode access switchport access vlan 4 no shutdown interface f0/5 switchport mode access ! default interface fa0/5 ! switchport mode trunk switchport trunk native vlan 8 ! switchport trunk allowed vlan 3,4,8,13 switchport access vlan 3 no shut end
Switch S2
enable config terminal hostname S2 no ip domain-lookup enable secret class line con 0 password cisco login logging synch line vty 0 15 password cisco login service password-encryption banner motd $ Authorized Users Only! $ vlan 3 name Management vlan 4 name Operations vlan 7 name ParkingLot vlan 8 name Native vlan 13 name Maintenance interface vlan 3 ip address 10.3.0.12 255.255.255.0 no shut interface range f0/2-17, f0/19-24, G0/1-2 switchport mode access switchport access vlan 7 shutdown interface f0/18 switchport mode access switchport access vlan 13 interface f0/1 switchport mode trunk switchport trunk native vlan 8 switchport trunk allowed vlan 4,8 ! switchport trunk allowed vlan add 3,13 ip default-gateway 10.3.0.1 end