Cisco Router License Featureset Configuration: Difference between revisions

From ITCwiki
Jump to navigation Jump to search
(Created page with "If you are using newer Cisco 1941 series routers in the CCNA Security class you may run into problems issuing certain commands which require the IOS Security feature set if th...")
 
(add data featureset)
Line 1: Line 1:
If you are using newer Cisco 1941 series routers in the CCNA Security class you may run into problems issuing certain commands which require the IOS Security feature set if the license has not yet been activated on your router.
If you are using Cisco 1941 series routers in the CCNA Security class you may run into problems issuing certain commands which require the IOS Security feature set if the license has not yet been activated on your router. If you are using Cisco 1941 series routers in the CCNA 6.0 class you may run into problems issuing certain commands which require the IOS Data feature set if the license has not yet been activated on your router.


=Security Feature Set Activation Procedure=
=Security Feature Set=
==Commands Which Require Security Featureset==
* Many
==Activation Procedure==
# Enter global configuration mode
# Enter global configuration mode
# Enter the '''license boot module c1900 technology-package securityk9''' command
# Enter the '''license boot module c1900 technology-package securityk9''' command
# Accept the EULA by entering '''yes'''
# Exit global configuration mode
# Save your current router configuration
# Reboot your router
=Data Feature Set=
==Commands Which Require Data Featureset==
* ip sla
==Activation Procedure==
# Enter global configuration mode
# Enter the '''license boot module c1900 technology-package datak9''' command
# Accept the EULA by entering '''yes'''
# Accept the EULA by entering '''yes'''
# Exit global configuration mode
# Exit global configuration mode
# Save your current router configuration
# Save your current router configuration
# Reboot your router
# Reboot your router

Revision as of 20:37, 19 April 2017

If you are using Cisco 1941 series routers in the CCNA Security class you may run into problems issuing certain commands which require the IOS Security feature set if the license has not yet been activated on your router. If you are using Cisco 1941 series routers in the CCNA 6.0 class you may run into problems issuing certain commands which require the IOS Data feature set if the license has not yet been activated on your router.

Security Feature Set

Commands Which Require Security Featureset

  • Many

Activation Procedure

  1. Enter global configuration mode
  2. Enter the license boot module c1900 technology-package securityk9 command
  3. Accept the EULA by entering yes
  4. Exit global configuration mode
  5. Save your current router configuration
  6. Reboot your router

Data Feature Set

Commands Which Require Data Featureset

  • ip sla

Activation Procedure

  1. Enter global configuration mode
  2. Enter the license boot module c1900 technology-package datak9 command
  3. Accept the EULA by entering yes
  4. Exit global configuration mode
  5. Save your current router configuration
  6. Reboot your router
Retrieved from "https://wiki.ihitc.net/mediawiki/index.php?title=Cisco_Router_License_Featureset_Configuration&oldid=7093"