Xmodem Console IOS Download Procedure using ROMMON: Difference between revisions

From ITCwiki
Jump to navigation Jump to search
(Created page with 'Step 1. Hook up the router: a. Connect your workstation to the router via a counsel cable b. Connect to the TFTP server using a crossover cable connected to Fa0/0 on the router. …')
 
No edit summary
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
Step 1. Hook up the router:
Xmodem is used for transfering files in a terminal program.
a. Connect your workstation to the router via a counsel cable
 
b. Connect to the TFTP server using a crossover cable connected to Fa0/0 on the router.
==Step 1.==
c. Turn on the router.
:Hit the break command as the router is loading it's image file (usually CTRL-C).
 
==Step 2.==
:Once in ROMmon, type in the following commands:
:::rommon 1> '''xmodem -c''' ''filename''
:::Enter
 
==Step 3.==
:::Do not start the sending program yet...
program load complete, entry point: 0x8000f000, size: 0xcb80
        File size          Checksum  File name
        0 bytes (0x0)        0x0000    -mz.124-1c.bin (invalid)
        0 bytes (0x0)        0x0000    xx.cfg (invalid)
        0 bytes (0x0)        0x0000    (invalid)
        0 bytes (0x0)        0x0000    (invalid)
        0 bytes (0x0)        0x0000    (invalid)
        0 bytes (0x0)        0x0000    (invalid)
        0 bytes (0x0)        0x0000    ig (invalid)
        0 bytes (0x0)        0x0000    ig (invalid)
        0 bytes (0x0)        0x0000    091021-142727 (invalid)
        0 bytes (0x0)        0x0000    (invalid)
 
WARNING: All existing data in flash will be lost!
Invoke this application only for disaster recovery.
Do you wish to continue? y/n  [n]:  '''y'''
 
==Step 4.==
::go to '''Transfer / Send File''' (if you are using Hyperterminal)
 
==Step 5.==
::Select the file you want to transfer.
 
==Step 6.==
::you will see a grey window, just wait until it is finished.

Latest revision as of 16:21, 25 November 2009

Xmodem is used for transfering files in a terminal program.

Step 1.

Hit the break command as the router is loading it's image file (usually CTRL-C).

Step 2.

Once in ROMmon, type in the following commands:
rommon 1> xmodem -c filename
Enter

Step 3.

Do not start the sending program yet...

program load complete, entry point: 0x8000f000, size: 0xcb80 

        File size           Checksum   File name
        0 bytes (0x0)        0x0000    -mz.124-1c.bin (invalid)
        0 bytes (0x0)        0x0000    xx.cfg (invalid)
        0 bytes (0x0)        0x0000     (invalid)
        0 bytes (0x0)        0x0000     (invalid)
        0 bytes (0x0)        0x0000     (invalid)
        0 bytes (0x0)        0x0000     (invalid)
        0 bytes (0x0)        0x0000    ig (invalid)
        0 bytes (0x0)        0x0000    ig (invalid)
        0 bytes (0x0)        0x0000    091021-142727 (invalid)
        0 bytes (0x0)        0x0000     (invalid)

WARNING: All existing data in flash will be lost! Invoke this application only for disaster recovery. Do you wish to continue? y/n [n]: y

Step 4.

go to Transfer / Send File (if you are using Hyperterminal)

Step 5.

Select the file you want to transfer.

Step 6.

you will see a grey window, just wait until it is finished.
Retrieved from "https://wiki.ihitc.net/mediawiki/index.php?title=Xmodem_Console_IOS_Download_Procedure_using_ROMMON&oldid=638"