Revision as of 05:45, 3 February 2013

This page includes links to relevant articles on this and other sites related to switches.

Password Recovery

switch# erase startup-config This will delete startup configurations if they were saved.
switch# delete flash:vlan.dat This deletes the vlan configuration.
switch# reload This must be done last to reload the default configurations.

@@ Line 14: / Line 14: @@
 =HP v1910 / 3Com Switches=
-==Enable Command Line Mode==
-By default these switches are only configurable through the web interface and a very basic CLI mode. A full featured CLI mode can be enabled by connecting to the switch via Telnet or console cable and, after logging on, entering '''_cmdline-mode on'''. Confirm that all commands will be displayed and executed. You will be put in user-view mode and can enter system-view mode by typing '''system-view'''. Using the '''?''' mark you can learn about the commands available in either mode.