Cisco Back-to-Back T1 Interface Configuration - Revision history

BenFranske: /* DCE IS S/0/1/0 AND DTE IS S0/1/1 */

2020-09-13T17:15:24Z

DCE IS S/0/1/0 AND DTE IS S0/1/1

← Older revision		Revision as of 17:15, 13 September 2020
Line 52:		Line 52:
	linecode b8zs		linecode b8zs

	==DCE IS ~~S/0~~/1/0 AND DTE IS S0/1/1==		==DCE IS S0/1/0 AND DTE IS S0/1/1==

	card type t1 0 1		card type t1 0 1

BenFranske at 17:14, 13 September 2020

2020-09-13T17:14:57Z

← Older revision		Revision as of 17:14, 13 September 2020
Line 19:		Line 19:
	\|}		\|}
	You should now have a Serial0/0/0:0 interface and/or Serial0/0/1:0 interface which you can assign an IP address to and use as with any normal serial interface, make sure to include the :0 on the end of the interface though.		You should now have a Serial0/0/0:0 interface and/or Serial0/0/1:0 interface which you can assign an IP address to and use as with any normal serial interface, make sure to include the :0 on the end of the interface though.

			'''Note: You need to adjust multiple lines of this configuration for the correct slot numbering on the router you are working on. In particular our 1900 series routers have serial cards in slot 0 subslot 0 and our 4000 series routers have cards in slot 0 subslot 1.'''
	=Sample Two Card Configuration=		=Sample Two Card Configuration=
	DCE IS S/0/0/0 AND DTE IS S0/0/1		'''Note: You need to adjust multiple lines of this configuration for the correct slot numbering on the router you are working on. In particular our 1900 series routers have serial cards in s0/0 and our 4000 series routers have cards in s0/1.'''

			==DCE IS S/0/0/0 AND DTE IS S0/0/1==

	card type t1 0 0		card type t1 0 0
Line 34:		Line 38:
	linecode b8zs		linecode b8zs

	DTE IS S0/0/0 AND DCE IS S0/0/1		==DTE IS S0/0/0 AND DCE IS S0/0/1==

	card type t1 0 0		card type t1 0 0
Line 48:		Line 52:
	linecode b8zs		linecode b8zs

	==~~==4000 Series routers use slightly different hardware nomenclature====~~		==DCE IS S/0/1/0 AND DTE IS S0/1/1==

	DCE IS S/0/1/0 AND DTE IS S0/1/1

	card type t1 0 1		card type t1 0 1
Line 64:		Line 66:
	linecode b8zs		linecode b8zs

	DTE IS S0/1/0 AND DCE IS S0/1/1		==DTE IS S0/1/0 AND DCE IS S0/1/1==

	card type t1 0 1		card type t1 0 1

NetSelect: /* 4000 Series routers use slightly different hardware nomanclature */

2020-06-17T21:48:23Z

4000 Series routers use slightly different hardware nomanclature

← Older revision		Revision as of 21:48, 17 June 2020
Line 48:		Line 48:
	linecode b8zs		linecode b8zs

	====4000 Series routers use slightly different hardware ~~nomanclature~~====		====4000 Series routers use slightly different hardware nomenclature====

	DCE IS S/0/1/0 AND DTE IS S0/1/1		DCE IS S/0/1/0 AND DTE IS S0/1/1

NetSelect: /* Sample Two Card Configuration */

2020-06-17T19:56:27Z

Sample Two Card Configuration

@@ Line 43: / Line 43: @@
   linecode b8zs
   controller t1 0/0/1
   clock source internal
   chan 0 time 1-24
   framing esf
   linecode b8zs

BenFranske: /* Sample Two Card Configuration */

2015-03-06T20:54:50Z

Sample Two Card Configuration

← Older revision		Revision as of 20:54, 6 March 2015
Line 23:		Line 23:

	card type t1 0 0		card type t1 0 0
	~~card type t1 0 1~~
	controller t1 0/0/0		controller t1 0/0/0
	clock source internal		clock source internal
Line 38:		Line 37:

	card type t1 0 0		card type t1 0 0
	~~card type t1 0 1~~
	controller t1 0/0/0		controller t1 0/0/0
	clock source line		clock source line

BenFranske at 20:53, 6 March 2015

2015-03-06T20:53:05Z

← Older revision		Revision as of 20:53, 6 March 2015
Line 23:		Line 23:

	card type t1 0 0		card type t1 0 0
			card type t1 0 1
	controller t1 0/0/0		controller t1 0/0/0
	clock source internal		clock source internal
Line 37:		Line 38:

	card type t1 0 0		card type t1 0 0
			card type t1 0 1
	controller t1 0/0/0		controller t1 0/0/0
	clock source line		clock source line

BenFranske at 20:51, 6 March 2015

2015-03-06T20:51:07Z

@@ Line 1: / Line 1: @@
 {| {{table}}
 | align="center" style="background:#f0f0f0;"|'''Step'''
@@ Line 18: / Line 19: @@
 |}
 You should now have a Serial0/0/0:0 interface and/or Serial0/0/1:0 interface which you can assign an IP address to and use as with any normal serial interface, make sure to include the :0 on the end of the interface though.

BenFranske at 02:02, 26 August 2014

2014-08-26T02:02:20Z

← Older revision		Revision as of 02:02, 26 August 2014
Line 12:		Line 12:
	\|-		\|-
	\| 3\|\|Set the channel group 0 to include all 24 T1 timeslots\|\|controller t1 ''slot/subslot/port''<br> channel-group 0 timeslots 1-24\|\|controller t1 0/0/0<br> channel-group 0 timeslots 1-24		\| 3\|\|Set the channel group 0 to include all 24 T1 timeslots\|\|controller t1 ''slot/subslot/port''<br> channel-group 0 timeslots 1-24\|\|controller t1 0/0/0<br> channel-group 0 timeslots 1-24
			\|-
			\| 4\|\|Set the port framing to esf\|\|controller t1 ''slot/subslot/port''<br> framing esf\|\|controller t1 0/0/0<br> framing esf
			\|-
			\| 5\|\|Set the linecode to b8zs\|\|controller t1 ''slot/subslot/port''<br> linecode b8zs\|\|controller t1 0/0/0<br> linecode b8zs
	\|}		\|}
	You should now have a Serial0/0/0:0 interface and/or Serial0/0/1:0 interface which you can assign an IP address to and use as with any normal serial interface, make sure to include the :0 on the end of the interface though.		You should now have a Serial0/0/0:0 interface and/or Serial0/0/1:0 interface which you can assign an IP address to and use as with any normal serial interface, make sure to include the :0 on the end of the interface though.

BenFranske at 01:56, 26 August 2014

2014-08-26T01:56:37Z

← Older revision		Revision as of 01:56, 26 August 2014
Line 13:		Line 13:
	\| 3\|\|Set the channel group 0 to include all 24 T1 timeslots\|\|controller t1 ''slot/subslot/port''<br> channel-group 0 timeslots 1-24\|\|controller t1 0/0/0<br> channel-group 0 timeslots 1-24		\| 3\|\|Set the channel group 0 to include all 24 T1 timeslots\|\|controller t1 ''slot/subslot/port''<br> channel-group 0 timeslots 1-24\|\|controller t1 0/0/0<br> channel-group 0 timeslots 1-24
	\|}		\|}
			You should now have a Serial0/0/0:0 interface and/or Serial0/0/1:0 interface which you can assign an IP address to and use as with any normal serial interface, make sure to include the :0 on the end of the interface though.

BenFranske at 01:53, 26 August 2014

2014-08-26T01:53:19Z

← Older revision		Revision as of 01:53, 26 August 2014
Line 11:		Line 11:
	\| 2b\|\|Set the clock source to line (on each DTE port)\|\|controller t1 ''slot/subslot/port''<br> clock source line\|\|controller t1 0/0/1<br> clock source line		\| 2b\|\|Set the clock source to line (on each DTE port)\|\|controller t1 ''slot/subslot/port''<br> clock source line\|\|controller t1 0/0/1<br> clock source line
	\|-		\|-
	\| 3\|\|Set the channel group to include all 24 T1 timeslots\|\|controller t1 ''slot/subslot/port''<br> channel-group 1 timeslots 1-24\|\|controller t1 0/0/0<br> channel-group 1 timeslots 1-24		\| 3\|\|Set the channel group 0 to include all 24 T1 timeslots\|\|controller t1 ''slot/subslot/port''<br> channel-group 0 timeslots 1-24\|\|controller t1 0/0/0<br> channel-group 0 timeslots 1-24
	\|}		\|}