CCNA 2 v7 Lab 4.4.9 Starting Configurations - Revision history

BenFranske at 21:29, 22 January 2020

2020-01-22T21:29:09Z

← Older revision		Revision as of 21:29, 22 January 2020
Line 1:		Line 1:
	Preconfiguration scripts for all the devices are documented below. Cut and paste or otherwise use these to pre-configure the equipment before beginning the lab.		Preconfiguration scripts for all the devices are documented below. Cut and paste or otherwise use these to pre-configure the equipment before beginning the lab.
	=Router R1=		=Router R1=
	<~~code~~>		<nowiki>
	enable		enable
	configure terminal		configure terminal
Line 30:		Line 30:
	encap dot1q 13		encap dot1q 13
	ip address 10.13.0.1 255.255.255.0		ip address 10.13.0.1 255.255.255.0
	end		end</nowiki>
	</~~code~~>
	=Switch S1=		=Switch S1=
	<~~code~~>		<nowiki>
	enable		enable
	config terminal		config terminal
Line 85:		Line 84:
	switchport access vlan 3		switchport access vlan 3
	no shut		no shut
	end		end</nowiki>
	</~~code~~>
	=Switch S2=		=Switch S2=
	<~~code~~>		<nowiki>
	enable		enable
	config terminal		config terminal
Line 129:		Line 127:
	! switchport trunk allowed vlan add 3,13		! switchport trunk allowed vlan add 3,13
	ip default-gateway 10.3.0.1		ip default-gateway 10.3.0.1
	end		end</nowiki>
	</~~code~~>

BenFranske at 21:26, 22 January 2020

2020-01-22T21:26:47Z

← Older revision		Revision as of 21:26, 22 January 2020
Line 1:		Line 1:
	Preconfiguration scripts for all the devices are documented below. Cut and paste or otherwise use these to pre-configure the equipment before beginning the lab.		Preconfiguration scripts for all the devices are documented below. Cut and paste or otherwise use these to pre-configure the equipment before beginning the lab.
	=Router R1=		=Router R1=
			<code>
	enable		enable
	configure terminal		configure terminal
Line 30:		Line 31:
	ip address 10.13.0.1 255.255.255.0		ip address 10.13.0.1 255.255.255.0
	end		end
			</code>
	=Switch S1=		=Switch S1=
			<code>
	enable		enable
	config terminal		config terminal
Line 83:		Line 86:
	no shut		no shut
	end		end
			</code>
	=Switch S2=		=Switch S2=
			<code>
	enable		enable
	config terminal		config terminal
Line 125:		Line 130:
	ip default-gateway 10.3.0.1		ip default-gateway 10.3.0.1
	end		end
			</code>

BenFranske: Created page with "Preconfiguration scripts for all the devices are documented below. Cut and paste or otherwise use these to pre-configure the equipment before beginning the lab. =Router R1= en..."

2020-01-22T21:25:49Z

Created page with "Preconfiguration scripts for all the devices are documented below. Cut and paste or otherwise use these to pre-configure the equipment before beginning the lab. =Router R1= en..."

New page

Preconfiguration scripts for all the devices are documented below. Cut and paste or otherwise use these to pre-configure the equipment before beginning the lab.
=Router R1=
enable
configure terminal
hostname R1
no ip domain lookup
enable secret class
line con 0
password cisco
login
logging synch
line vty 0 4
password cisco
login
service password-encryption
banner motd $ Authorized Users Only! $
interface g0/0/1
no shut
interface g0/0/1.3
encap dot1q 3
ip add 10.3.0.1 255.255.255.0
interface g0/0/1.4
encap dot1q 4 native
ip address 10.4.0.1 255.255.255.0
interface g0/0/1.8
! encap dot1q 8 native
encap dot1q 8
interface g0/0/1.13
encap dot1q 13
ip address 10.13.0.1 255.255.255.0
end
=Switch S1=
enable
config terminal
hostname S1
no ip domain-lookup
enable secret class
line con 0
password cisco
login
logging synch
line vty 0 15
password cisco
login
service password-encryption
banner motd $ Authorized Users Only! $
vlan 3
name Management
vlan 4
name Operations
vlan 7
name ParkingLot
vlan 8
name Native
!vlan 13
! name Maintenance
interface vlan 3
ip address 10.3.0.11 255.255.255.0
no shut
exit
ip default-gateway 10.3.0.1
interface range f0/2-4, f0/7-24, G0/1-2
switchport mode access
switchport access vlan 7
shutdown
interface f0/1
switchport mode trunk
! switchport trunk native vlan 8
! switchport trunk allowed vlan add 3
switchport trunk allowed vlan 4,8,13
no shutdown
interface f0/6
switchport mode access
switchport access vlan 4
no shutdown
interface f0/5
switchport mode access
! default interface fa0/5
! switchport mode trunk
switchport trunk native vlan 8
! switchport trunk allowed vlan 3,4,8,13
switchport access vlan 3
no shut
end
=Switch S2=
enable
config terminal
hostname S2
no ip domain-lookup
enable secret class
line con 0
password cisco
login
logging synch
line vty 0 15
password cisco
login
service password-encryption
banner motd $ Authorized Users Only! $
vlan 3
name Management
vlan 4
name Operations
vlan 7
name ParkingLot
vlan 8
name Native
vlan 13
name Maintenance
interface vlan 3
ip address 10.3.0.12 255.255.255.0
no shut
interface range f0/2-17, f0/19-24, G0/1-2
switchport mode access
switchport access vlan 7
shutdown
interface f0/18
switchport mode access
switchport access vlan 13
interface f0/1
switchport mode trunk
switchport trunk native vlan 8
switchport trunk allowed vlan 4,8
! switchport trunk allowed vlan add 3,13
ip default-gateway 10.3.0.1
end