View source for CCNA 2 v7 Lab 4.4.9 Starting Configurations

Preconfiguration scripts for all the devices are documented below. Cut and paste or otherwise use these to pre-configure the equipment before beginning the lab.
=Router R1=
<code>
enable
configure terminal
hostname R1
no ip domain lookup
enable secret class
line con 0
 password cisco
 login
 logging synch
line vty 0 4
 password cisco
 login
service password-encryption
banner motd $ Authorized Users Only! $
interface g0/0/1
 no shut
interface g0/0/1.3
 encap dot1q 3
 ip add 10.3.0.1 255.255.255.0
interface g0/0/1.4
 encap dot1q 4 native
 ip address 10.4.0.1 255.255.255.0
interface g0/0/1.8
! encap dot1q 8 native
 encap dot1q 8
interface g0/0/1.13
 encap dot1q 13
 ip address 10.13.0.1 255.255.255.0
end
</code>
=Switch S1=
<code>
enable
config terminal
hostname S1
no ip domain-lookup
enable secret class
line con 0
 password cisco
 login
 logging synch
line vty 0 15
 password cisco
 login
service password-encryption
banner motd $ Authorized Users Only! $
vlan 3
 name Management
vlan 4
 name Operations
vlan 7
 name ParkingLot
vlan 8
 name Native
!vlan 13
! name Maintenance
interface vlan 3
 ip address 10.3.0.11 255.255.255.0
 no shut
exit
ip default-gateway 10.3.0.1
interface range f0/2-4, f0/7-24, G0/1-2
 switchport mode access
 switchport access vlan 7
 shutdown
interface f0/1
 switchport mode trunk
! switchport trunk native vlan 8
! switchport trunk allowed vlan add 3
 switchport trunk allowed vlan 4,8,13
 no shutdown
interface f0/6
 switchport mode access
 switchport access vlan 4
 no shutdown
interface f0/5
 switchport mode access
! default interface fa0/5
! switchport mode trunk
 switchport trunk native vlan 8
! switchport trunk allowed vlan 3,4,8,13
 switchport access vlan 3
 no shut
end
</code>
=Switch S2=
<code>
enable
config terminal
hostname S2
no ip domain-lookup
enable secret class
line con 0
 password cisco
 login
 logging synch
line vty 0 15
 password cisco
 login
service password-encryption
banner motd $ Authorized Users Only! $
vlan 3
 name Management
vlan 4
 name Operations
vlan 7
 name ParkingLot
vlan 8
 name Native
vlan 13
 name Maintenance
interface vlan 3
 ip address 10.3.0.12 255.255.255.0
 no shut
interface range f0/2-17, f0/19-24, G0/1-2
 switchport mode access
 switchport access vlan 7
 shutdown
interface f0/18
 switchport mode access
 switchport access vlan 13
interface f0/1
 switchport mode trunk
 switchport trunk native vlan 8
 switchport trunk allowed vlan 4,8
! switchport trunk allowed vlan add 3,13
ip default-gateway 10.3.0.1
end
</code>